Hi:
these days I use step 7 library FB65，FB63,FB64，FB66，and use open communication wizard to creat UDT65.
I use couple PLCSIM(TCP/IP) to communnicate each other,but FB65 always busy(set 1).
someone who can teach me does S7 plcsim support TCP (SOCKET).
Does S7PLCSIM supprot SOCKET?
-
ydjslee
- Posts: 1
- Joined: Mon Nov 18, 2013 6:23 am
Re: Does S7PLCSIM supprot SOCKET?
S7 PLCSIM Provide only S7connection
Description
As from S7-PLCSIM V5.4 + SP3 you can use S7-PLCSIM to simulate multiple SIMATIC S7-300/400
CPU modules simultaneously in a STEP 7 project and establish communication between the CPU
modules. The following communication blocks are supported for communication:
SFB8 "USEND"
SFB9 "URCV"
SFB12 "BSEND"
SFB13 "BRCV"
SFB15 "PUT"
SFB14 "GET"
SFB19 "START"
SFB 20 "STOP"
SFB 22 "STATUS"
SFB 23 "USTATUS"
Description
As from S7-PLCSIM V5.4 + SP3 you can use S7-PLCSIM to simulate multiple SIMATIC S7-300/400
CPU modules simultaneously in a STEP 7 project and establish communication between the CPU
modules. The following communication blocks are supported for communication:
SFB8 "USEND"
SFB9 "URCV"
SFB12 "BSEND"
SFB13 "BRCV"
SFB15 "PUT"
SFB14 "GET"
SFB19 "START"
SFB 20 "STOP"
SFB 22 "STATUS"
SFB 23 "USTATUS"