Proface GP Pro-/PBIII for begginer

другие контроллеры
fpramanik
Posts: 28
Joined: Tue Oct 15, 2013 1:18 pm

Proface GP Pro-/PBIII for begginer

Post by fpramanik »

Hi all ,
I am new in Proface HMI..and try to make project which will connect with Seimens CPU313C-2DP
My HMI model is GP2500-41C-24v and software version GP Pro-/PB3 V7.2
I want to know some point

1. How to upload all address from Simatic manager or CPU313C-2DP?
is there any symbol editor or tag editor in GP pro-PB3?
2. when connect HMI to PLC after downloading project with basic setting and base screen ,It Show ERROR
PLC com. Error(02:FB:002) why?
PLC and hmi communication cable is my made.(with siemens profibus connector and 25 pin Male connector)

Please help me..
fpramanik
Posts: 28
Joined: Tue Oct 15, 2013 1:18 pm

Re: Proface GP Pro-/PBIII for begginer

Post by fpramanik »

I found Symbol editor by switching (Change Project Manager)
fpramanik
Posts: 28
Joined: Tue Oct 15, 2013 1:18 pm

Re: Proface GP Pro-/PBIII for begginer

Post by fpramanik »

Is there any handshaking signal required for GP 2500 form PLC

please help
wiener
Posts: 167
Joined: Tue Jul 20, 2010 1:20 pm

Re: Proface GP Pro-/PBIII for begginer

Post by wiener »