Dear All
I want to connect Magelis HMIGXO3502 to S7-300 CPU (through MPI port or profibus port) but the problem in cable (I should make DB9 female "connect in Magelis port 2" and DB9 male "connect in S7- 300 CPU") can any one help me by sending pin out of this cable?
Regards
Magelis with S7-300
-
gary_angel
- Posts: 7
- Joined: Thu Aug 07, 2014 10:09 am
Re: Magelis with S7-300
I found this manual(German language) - http://download.schneider-electric.com/ ... 002_04.pdf
-
omar zedan
- Posts: 244
- Joined: Sat Oct 22, 2011 7:12 am
Re: Magelis with S7-300
Dear gary_angel
I read in some sites it is possible to connect the Magelis to S7- 300 cpu through profibus port using cable (just cable no adapter required) and I ask about the pin diagram of this cable, also I want to mention that the magelis HMIGXO3502 has DB9 male port (Port 2) can work as RS 485 and as you know the S7 -300 CPU has a female DB9 as profibus.
I want the pin diagram of this cable if it is available
Thanks so much
I read in some sites it is possible to connect the Magelis to S7- 300 cpu through profibus port using cable (just cable no adapter required) and I ask about the pin diagram of this cable, also I want to mention that the magelis HMIGXO3502 has DB9 male port (Port 2) can work as RS 485 and as you know the S7 -300 CPU has a female DB9 as profibus.
I want the pin diagram of this cable if it is available
Thanks so much