CMZ CTE 240

другие контроллеры
Khghost
Posts: 2
Joined: Mon May 05, 2014 6:54 am

CMZ CTE 240

Post by Khghost »

ALSLAMU ALYKUM
I have a CTE 240 for axis control need to be replaced but before purchasing another one i need to upload the program ,would some one please help me find the wide environment programming tool for the CMZ CTE 240 ?
thank you 8) (thnx)
Top
smsasg
Posts: 44
Joined: Tue Apr 11, 2006 4:40 am
Location: Russia

Re: CMZ CTE 240

Post by smsasg »

http://dropmefiles.com/P8b8m
Top
Khghost
Posts: 2
Joined: Mon May 05, 2014 6:54 am

Re: CMZ CTE 240

Post by Khghost »

thank you very much for your help. (pgood) (tyou)
Top
yeosh99
Posts: 59
Joined: Thu Jul 14, 2011 4:40 pm

Re: CMZ CTE 240

Post by yeosh99 »

How to download frm this site?
Top
Yaros123
Posts: 3
Joined: Mon Mar 29, 2010 5:51 am

Re: CMZ CTE 240

Post by Yaros123 »

Give a link please once again on CTE-240
Top
smsasg
Posts: 44
Joined: Tue Apr 11, 2006 4:40 am
Location: Russia

Re: CMZ CTE 240

Post by smsasg »

http://dropmefiles.com/8EngO
Top
Yaros123
Posts: 3
Joined: Mon Mar 29, 2010 5:51 am

Re: CMZ CTE 240

Post by Yaros123 »

Спасибо
Top
Roman_Greh
Posts: 2
Joined: Fri Jul 17, 2015 12:21 pm

Re: CMZ CTE 240

Post by Roman_Greh »

Give a link please once again
Top
smsasg
Posts: 44
Joined: Tue Apr 11, 2006 4:40 am
Location: Russia

Re: CMZ CTE 240

Post by smsasg »

https://dropmefiles.com/BY5UL
Top
Roman_Greh
Posts: 2
Joined: Fri Jul 17, 2015 12:21 pm

Re: CMZ CTE 240

Post by Roman_Greh »

thank you :)
Top
eng-hazem
Posts: 2
Joined: Sun Aug 23, 2015 10:08 am

Re: CMZ CTE 240

Post by eng-hazem »

I have the same problem fro CTE-240 , but the link for software not work

can you smsasg put it again please :)
Top
smsasg
Posts: 44
Joined: Tue Apr 11, 2006 4:40 am
Location: Russia

Re: CMZ CTE 240

Post by smsasg »

https://dropmefiles.com/KwrWQ
Top
eng-hazem
Posts: 2
Joined: Sun Aug 23, 2015 10:08 am

Re: CMZ CTE 240

Post by eng-hazem »

thanks alot smsasg , from this software i can upload the program from CMZ CTE-240
Top
repitu
Posts: 1
Joined: Thu Nov 05, 2015 7:34 pm

Re: CMZ CTE 240

Post by repitu »

I have a simmilar problem as described, but I can not access the link.

Could you upload the file again?

Thank you
Top
smsasg
Posts: 44
Joined: Tue Apr 11, 2006 4:40 am
Location: Russia

Re: CMZ CTE 240

Post by smsasg »

https://dropmefiles.com/XBi5U
Top
lsgosha
Posts: 1
Joined: Mon Nov 23, 2015 8:41 am

Re: CMZ CTE 240

Post by lsgosha »

Could you upload the file again?

Thank you
Top
smsasg
Posts: 44
Joined: Tue Apr 11, 2006 4:40 am
Location: Russia

Re: CMZ CTE 240

Post by smsasg »

https://mega.nz/#!uQ4WkKTQ!ksSZIs9e-I2e ... 3T0caIWoIA
Top
zaplatin
Posts: 65
Joined: Mon Dec 14, 2015 5:45 am

Re: CMZ CTE 240

Post by zaplatin »

Can you help me how to upload program from plc?
What I can do in wide? My be not wide?
Top
Volidol
Posts: 10
Joined: Fri Jun 28, 2019 5:48 am

Re: CMZ CTE 240

Post by Volidol »

привет, можно задать вопрос по контролеру CMZ CTE 240
Top
zaplatin
Posts: 65
Joined: Mon Dec 14, 2015 5:45 am

Re: CMZ CTE 240

Post by zaplatin »

Но с CMZ я мало имел дело, получилось выгрузить upload из панели управления на этом все и закончилось. чтоб выгрузить с панели в ней нужно зайти в сервисное меню иначе не подключится. кабель отдельно делал. и программное обеспечения должно поддерживать именно ту панель тот тип.
Top
ZeroCool
Posts: 1
Joined: Fri Feb 07, 2020 10:56 am

Re: CMZ CTE 240

Post by ZeroCool »

После загрузки bin файла программа на плк запускается и виснет на заставке wait, идёт постоянная перезагрузка,кто что делал в этом случае?Файл awl удалось выгрузить,он 2 мегабайта, а вот обратно не получается загрузить, wide ругается что мало места в плк.Какая адресация должна быть в настройках ram work area и length area?
Top
Zest
Posts: 1
Joined: Wed Sep 23, 2020 6:32 am

Re: CMZ CTE 240

Post by Zest »

всем добрый день, подскажите столкнулся с проблемой контролер не включается. При включение засвечивается экран и тут же выключается, и так постоянно с периодичностью 10 секунд.
Top
fduch
Posts: 4
Joined: Fri Dec 15, 2023 6:59 am

Re: CMZ CTE 240

Post by fduch »

ZeroCool wrote: ↑Fri Feb 07, 2020 11:06 am Какая адресация должна быть в настройках ram work area и length area?
Working areas are set with standard default values:
- from 1C8000 to 1D7BFD for CTE300 series controllers.
- from 107000 to 13DFFD for 331CPU systems.

I have some trouble to prohramming CTE 240.10111 (without LCD). Can anyone explain what *bin I need to programm FLASH eeprom in PLC ?
Top

Return to “Other PLC”