SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
yacino
Posts: 10 Joined: Tue Mar 24, 2015 4:35 pm
Post by yacino Thu Apr 09, 2015 8:00 am
Hi,
When starting the station configuration editor, this error appear :
error wrote: SIMATIC NET Core Server S7OPT
i'm using the Simatic Net V12.
please can any one help me to remove it
CoMod
Site Admin
Posts: 3992 Joined: Thu Feb 16, 2006 3:25 pmLocation: Russia
Post by CoMod Sat Apr 11, 2015 3:47 pm
yacino
Posts: 10 Joined: Tue Mar 24, 2015 4:35 pm
Post by yacino Sat Apr 11, 2015 5:30 pm
Thanks for the response,
this is the EKB install
i install the recomnded keys.
http://www.filedropper.com/ekb
the i reboot the computer, but i still have the problem;
this is what the ALM show me for licesne,
i think that the license of the SIMATIC Net is not installed , because there is only the 8.0 license as the picture below show:
http://www.filedropper.com/alm
CoMod
Site Admin
Posts: 3992 Joined: Thu Feb 16, 2006 3:25 pmLocation: Russia
Post by CoMod Sat Apr 11, 2015 9:31 pm
You have installed
ALL KEYS
For Simatic Net V12 from TIA Portal need install v12 keys
For Step7 v5.5 need install
1 key from Net v6.*... to 8.2
yacino
Posts: 10 Joined: Tue Mar 24, 2015 4:35 pm
Post by yacino Sun Apr 12, 2015 10:22 am
Thanks again ,
I download the SIM_EKB_INSTALL_2015.
I delete all the licenses key.
I reboot the computer.
I install all the keys again.
This is what the ALM show me:
but i have still the problem
CoMod
Site Admin
Posts: 3992 Joined: Thu Feb 16, 2006 3:25 pmLocation: Russia
Post by CoMod Sun Apr 12, 2015 12:19 pm
yacino wrote:
Thanks again ,
I download the SIM_EKB_INSTALL_2015.
I delete all the licenses key.
I reboot the computer.
I install all the keys again.
install all the
again
Install only 1 key for your Simatic Net version
Show ALM > Installed software folder
yacino
Posts: 10 Joined: Tue Mar 24, 2015 4:35 pm
Post by yacino Sun Apr 12, 2015 5:17 pm
Hi
I hope that you're not tired for me, but this is what tha ALM show:
so the simatic net 12 license is installed correctly but it's still show me the demo mode.
Sorry for my questions
CoMod
Site Admin
Posts: 3992 Joined: Thu Feb 16, 2006 3:25 pmLocation: Russia
Post by CoMod Sun Apr 12, 2015 5:47 pm
yacino wrote: so the simatic net 12 license is installed correctly but it's still show me the demo mode.
Key from 6.* can block key v12.
https://support.industry.siemens.com/cs ... d?lc=en-WW
How can you deactivate the Trial License when the message appears indicating that the Trial License has expired, although the Floating License has been installed?
yacino
Posts: 10 Joined: Tue Mar 24, 2015 4:35 pm
Post by yacino Mon Apr 13, 2015 9:07 am
Hi,
thank you so much, the problem is solved.
Regards
again 
https://support.industry.siemens.com/cs ... d?lc=en-WW
