Hi. I've ordered FactoryTalk View SE Station 100 Display, HMI FactoryTalk View Studio for Machine Edition and RSLogix 5000 Full Edition Software.
I want to program CompactLogix 5370 L3, PanelView plus 6, Micro850 and want to build Scada and visualize it. Is it possible to do it all with these programs?
As I understand, RSlogix5000 needs to program compactLogix 5370, FactoryTalk View Studio to program PanleView Plus 6 and SCADA, FactoryTalk View SE Station to visualize SCADA. For Micro850 there is free way to program it. Am I right or there is some mistake?
Thanks
Complect of FactoryTalk
-
NowanH
- Posts: 80
- Joined: Wed Apr 30, 2014 6:16 pm
Re: Complect of FactoryTalk
There are two versions of FactoryTalk View Studio:
1. FactoryTalk View Studio for FactoryTalk View Enterprise (9701-VWSTENE): you can develop appplications for site edition and machine edition.
2. FactoryTalk View Studio for Machine Edition (9701-VWSTMENE): you can develop application ONLY for machine edition.
For Micro850:
http://www.rockwellautomation.com/globa ... age?#/tab1
1. FactoryTalk View Studio for FactoryTalk View Enterprise (9701-VWSTENE): you can develop appplications for site edition and machine edition.
2. FactoryTalk View Studio for Machine Edition (9701-VWSTMENE): you can develop application ONLY for machine edition.
For Micro850:
http://www.rockwellautomation.com/globa ... age?#/tab1