2016-01-12 EPLAN 2.1 2.3 2.4 2.5 patch x64(Final version)

PDLFFALF · Post by **PDLFFALF** » Mon Aug 31, 2015 1:42 am

2016-01-12 EPLAN 2.1 2.3 2.4 2.5 patch x64(Final version)

http://eplan-eb2.ys168.com/

van8x10 · Post by **van8x10** » Mon Aug 31, 2015 5:00 am

Thank a lot Mr PDLFFALF, It's running OK on Windows 10 x64. But some importal add-ons (Propanel, EDZ format etc. ) are not licensed. Could you please upgrade to Professional + or Ultimate? Thank again!

Luca · Post by **Luca** » Mon Aug 31, 2015 8:04 am

Thanks PDLFFALF!
I was able to start it with windows 8.1. It's only "Professional" indeed. I also have some strange lag spikes about once in a minute for 5-10 seconds - the program is unresponsive. Does anyone else have the same problem or is it only me? On the same machine i have no problem running 2.4.

Looking forward for Ultimate + ProPanel Professional license

PDLFFALF · Post by **PDLFFALF** » Mon Aug 31, 2015 8:31 am

RUN
G:\ELM\Services (x64)\Drivers\HASPUserSetup.exe

Luca · Post by **Luca** » Mon Aug 31, 2015 9:34 am

With the HASPUserSetup.exe included in the patch it didn't work in Windows 8.1 (the dongle is with yellow exclamation mark in the device manager). I downloaded the latest version from www.safenet-inc.com and the dongle is ok but it still lags

Luca · Post by **Luca** » Mon Aug 31, 2015 12:34 pm

Great news!
Go to http://eplan-eb2.ys168.com/ and download the patch again. The license is SN-U10066: Ultimate+ all addons.

van8x10 · Post by **van8x10** » Mon Aug 31, 2015 10:03 pm

Great job!

Now we are waiting for Mr Sadefa and Mr Sprudel1968

xblu · Post by **xblu** » Tue Sep 01, 2015 4:48 pm

Guys someone post the steps for windows 10? Thank you

taherone · Post by **taherone** » Tue Sep 01, 2015 7:13 pm

Works on Windows 10 ???

JMG · Post by **JMG** » Thu Sep 03, 2015 8:49 am

Very good
It works perfectly in W8.1
To install the patch is necessary to disable verification

gregar · Post by **gregar** » Fri Sep 04, 2015 7:08 am

Luca wrote:Thanks PDLFFALF!
I was able to start it with windows 8.1. It's only "Professional" indeed. I also have some strange lag spikes about once in a minute for 5-10 seconds - the program is unresponsive. Does anyone else have the same problem or is it only me? On the same machine i have no problem running 2.4.

I have a similar problem on Windows 7 Pro 64 bits. Any ideas please.

xblu · Post by **xblu** » Fri Sep 04, 2015 5:03 pm

guys can anyone help me with the procedure? Thank you

sadefa · Post by **sadefa** » Sat Sep 05, 2015 8:35 am

I hope this is OK for you viewtopic.php?f=7&t=23112&p=72530#p72530

xblu · Post by **xblu** » Sun Sep 06, 2015 10:14 am

van8x10 wrote:Thank a lot Mr PDLFFALF, It's running OK on Windows 10 x64. But some importal add-ons (Propanel, EDZ format etc. ) are not licensed. Could you please upgrade to Professional + or Ultimate? Thank again!

Excuse me can you tell me how do I install on windows 10? Thank you

Luca · Post by **Luca** » Mon Sep 07, 2015 2:11 pm

Luca wrote:Thanks PDLFFALF!
I was able to start it with windows 8.1. It's only "Professional" indeed. I also have some strange lag spikes about once in a minute for 5-10 seconds - the program is unresponsive. Does anyone else have the same problem or is it only me? On the same machine i have no problem running 2.4.

I haven't found a solution yet. I have tried on fresh copy of windows 10 and made clean installation of eplan 2.5 but the problem is still there.

From what i can tell it has to do with the new Eplan License Client. Because with the new file (.egf) and new license client(2.5)- both Eplan 2.4 and 2.5 installations lags. On the other hand: new file (.egf) and old license client(2.4) - Eplan 2.4 runs smoothly but Eplan 2.5 doesn't start.

Another hint is that with the new version of the license client (2.5) there is no longer the hardware error message at the beginning.

My question: is there anyone who doesn't have the problem with occasional lag? So we can try to figure out what he did differently.

The lag spikes are really annoying and almost unbearable if you try to use the program for long period of time

Luca · Post by **Luca** » Wed Sep 09, 2015 2:43 pm

Doesn't the lag spikes bother you? Or is it just me and @gregar having this problem?

van8x10 · Post by **van8x10** » Wed Sep 09, 2015 3:57 pm

I have the same problem on Windows 10 x64

pronto1308 · Post by **pronto1308** » Wed Sep 09, 2015 5:12 pm

Hello
I have download the EPLAN P8 2.5 CRACK ( http://eplan-eb2.ys168.com/).
But don't now how install it and use the file because the explanation is in Chinese language.
Where can I found one, with a english text?

This is what I see in the txt-file

(text here below)

1£º°²×°EPLAN 2.5ÏµÁÐÈí¼þ¡£
2£ºË«»÷SN-U38269.REG£¬µ¼Èë×¢²á±íÎÄ¼þ¡£
3£ºË«»÷¹ýÆøµãÕâ¸ö.BATÎÄ¼þ¡£ÒÔºóÒ»ÔÂ¹ýÆÚ²»ÄÜÓÃÊÇÒ²ÔËÐÐÏÂÕâ¸öÎÄ¼þ¾ÍÐÐÁË¡£
4£ºÔËÐÐMultiKey.exe,Ñ¡ÔñÏµÍ³°²×°Ñ¡Ïî°²×°¡£
5£ºÖØÆô¾Í¿ÉÒÔÁË¡£

It's also the same situation (Chinese language

), when I open the MultiKey.exe

Multikey.exe

_______________________||||||||||||||____________________________
______________________| .................. |___________________________
_____________________| ..................... |__________________________
____________________|.......¹Ø±ÖUAC ........|_________________________
___________________|.............................|________________________
__________________|................................|_______________________
_________________|..32Bit MultiKey°²x°...........|______________________
_________________|...................................|______________________
_________________|...................................|______________________
_________________|....64Bit Multikey°²x°.........|______________________
_________________|...................................|______________________
__________________|.................;...............|_______________________
__________________|..64Bit MultikeyÐþ²¹.........|_______________________
___________________|.....................;......|_________________________
____________________|.........................|__________________________
_____________________|.......IË³ö..........|___________________________
______________________|....................|____________________________
_______________________|.................|_____________________________
________________________|||||||||||||_____________________________

Hope find a person fore translate or with a

ck1234 · Post by **ck1234** » Thu Sep 10, 2015 8:33 am

Luca wrote:Doesn't the lag spikes bother you? Or is it just me and @gregar having this problem?

Same here

GavinTroy · Post by **GavinTroy** » Fri Sep 11, 2015 8:20 pm

Installation on windows 10 for Eplan 2.3 (It should be similar for 2.5):

1. Install EPLAN
2. Run .bat file OR copy SN-U10066.EGF in C:\Users\Public\EPLAN\Common\
3. Run .reg file
4. Run MultiKey.exe and install the one you need (In my case it works with the first 64Bit MultiKey)
At this point you should see an unknow device in Device manager
5. Right click the unknow device and choose "Update driver software.." and
"Browse my computer for driver software". Now you need one of the 64Bit Multikeys from the old Cracks for EPLAN 2.3 or 2.4 (I used EPLAN P8 2.4 patch Windows x32x64\Release\MultiKey64 folder).
6. Now you need to Disable Driver Signature Enforcement for windows 10
There are two ways:
- First one works for one windows session only and is disabled after restart (I do not recommend it b/c you need to repeat this step evert time you shutdown or restart your PC): Press F8 while windows loads to enter Advanced options screen, Go to Troubleshoot -> Advanced options -> Windows Startup Settings, Click restart. The system will restart to "Advanced Boot Options" screen. Select option 7 - "Disable Driver Signature Enforcement". Restart PC and Eplan will work for this Windows session only.
- Second PERMANENT way (I recommend this one):
Open the Windows command promt as “Run as Administrator”.
Run “bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS” (without the “”).
To finalize the process run “bcdedit -set TESTSIGNING ON” (without the “”).
Reboot and you’re done.

abelinux · Post by **abelinux** » Mon Sep 14, 2015 8:57 pm

Luca wrote:Thanks PDLFFALF!
I was able to start it with windows 8.1. It's only "Professional" indeed. I also have some strange lag spikes about once in a minute for 5-10 seconds - the program is unresponsive. Does anyone else have the same problem or is it only me? On the same machine i have no problem running 2.4.

Hi all! Same here, Windows 7 Pro 64 bits.. Pretty annoying

justmember · Post by **justmember** » Sat Sep 19, 2015 9:25 am

I have too lags on 2.5. Now i'm roll back to 2.4. I expect some solutions.

abelinux · Post by **abelinux** » Mon Sep 21, 2015 4:52 pm

abelinux wrote:Hi all! Same here, Windows 7 Pro 64 bits.. Pretty annoying

Hi again! Just updated drivers from Sentinel web page to version 7.32 (though file properties claims it's 7.40, so...), still same lag

Perez1985 · Post by **Perez1985** » Thu Sep 24, 2015 7:03 am

The problem of lags is connected with EPLAN License Client. When I install version 9.1.13.64100 I get lags with version of Eplan 2.4. When I install version 9.1.12.54500 with Eplan 2.4 is OK. But Eplan 2.5 require virsion of EPLAN License Client 9.1.13.64100. I have replaced three files :
"c:\Program Files\EPLAN\Common\EClientService.exe"
"c:\Program Files\EPLAN\Common\EplanCommonCore.dll"
"c:\Program Files\EPLAN\Common\en-US\EplanCommonResU.dll"
from version of EPLAN EPLAN License Client 9.1.13.64100.
That was enough for version 2.5. But lags back.

Therefore, the root of evil in these three files.

chakotay · Post by **chakotay** » Mon Sep 28, 2015 1:58 pm

Same issue here.

Did some testing by changing version numbers in some of the dll files - with no result.

The problem is multikey (virtual USB emulator).

They speed up their query to the dongle. (or the quantity)
If I'm trying to test it with a real usb dongle it works like a charm. Multikey seems not fast enough for the latest License Client. We need a new version of it.

Cheers,
chakotay

Rasputingue · Post by **Rasputingue** » Fri Oct 02, 2015 6:48 am

Connexion with Eplan Client Service not available. Service is deactivated or not devices associated with it.

Any idea of that error upon openning eplan 2.5?

Rasputingue · Post by **Rasputingue** » Tue Oct 20, 2015 8:41 am

Lag spikes here too

. Any solutions yet? I can't go back to 2.3...

Luca · Post by **Luca** » Tue Oct 20, 2015 3:25 pm

As far as I know there is no solution yet. I've returned to 2.4

chakotay · Post by **chakotay** » Fri Nov 13, 2015 10:16 am

Just modifying the source code of multikey would be the one and only solution.
I did some modifications with multikey. It's now completely hidden for any kind of search procedure.
(multikey.sys is renamed to emu99.sys, registry entry has been moved, etc..)

Result: lagging furthermore.

It's a new way how the software is talking to the dongle and how fast it expects a response.

Rasputingue · Post by **Rasputingue** » Wed Nov 18, 2015 7:59 am

Well -spam-, that doesn't seem easy to fix. Can't go back to 2.4 now, damn!

gosenge · Post by **gosenge** » Wed Nov 18, 2015 5:40 pm

Hey guys,

Today I am trying to use plan 2.5 but I have some lags too...

I don´t know how to solve this problem

I install it on windows 10

chakotay · Post by **chakotay** » Mon Nov 23, 2015 3:12 pm

I install it on windows 10

It has nothing to do with your OS.

gosenge · Post by **gosenge** » Mon Nov 23, 2015 7:58 pm

mmmmm....in windows 7 64 bits do you have lag spikes??

abelinux · Post by **abelinux** » Mon Nov 23, 2015 9:30 pm

gosenge wrote:mmmmm....in windows 7 64 bits do you have lag spikes??

Yes

Renan Rocha · Post by **Renan Rocha** » Thu Dec 10, 2015 9:01 pm

Anybody have a solution? Please.

Rasputingue · Post by **Rasputingue** » Tue Dec 15, 2015 8:15 am

It seems they found or might find a solution here: http://tieba.baidu.com/p/4081673932

A guy says (google translated) "The reason is that the software detects the card dongle drivers drive to upgrade my connection always has been reported there is no way to share"
and three replies ask them for the solution by email.

If by any chance someone here knows Chinese better than google translator maybe he give us a hand here.

engmann18 · Post by **engmann18** » Thu Dec 24, 2015 8:53 pm

Hi guys for all eplan license file, after thirty days it seem to request for verification which is not possible with our crack version but i have found a way of bypassing that, all need to do is to reinstall the .reg file again which would change the clock to the current date there is no need to change the date on your pc. i am currently using version 2.4 and anytime the license expires

PDLFFALF · Post by **PDLFFALF** » Tue Jan 05, 2016 8:51 pm

Luca wrote:Doesn't the lag spikes bother you? Or is it just me and @gregar having this problem?

2016_01_05 EPLAN P8 1.8- 2.5 patch Windows x32x64.rar

PDLFFALF · Post by **PDLFFALF** » Tue Jan 05, 2016 8:52 pm

gosenge wrote:mmmmm....in windows 7 64 bits do you have lag spikes??

2016_01_05 EPLAN P8 1.8- 2.5 patch Windows x32x64.rar

PDLFFALF · Post by **PDLFFALF** » Tue Jan 05, 2016 8:55 pm

chakotay wrote:Just modifying the source code of multikey would be the one and only solution.
I did some modifications with multikey. It's now completely hidden for any kind of search procedure.
(multikey.sys is renamed to emu99.sys, registry entry has been moved, etc..)

Result: lagging furthermore.

It's a new way how the software is talking to the dongle and how fast it expects a response.

2016_01_05 EPLAN P8 1.8- 2.5 patch Windows x32x64.rar

abelinux · Post by **abelinux** » Tue Jan 05, 2016 9:17 pm

Wooow..! I don't want to get too excited until I can confirm it actually works

For those of us already using EPlan 2.5 (with lag spikes), should we use the files in the zip's "root" (i.e.: multikey, .reg, .egf)?
Or are we supposed to use the files inside the "防卡补丁" subfolder (i.e.: EPLAN.exe, .xml, .dll)?

Does anyone have a clue? Thanks!

PDLFFALF · Post by **PDLFFALF** » Tue Jan 05, 2016 9:38 pm

copy version.dll to C:\Program Files\EPLAN\Platform\2.5.4\Bin

Perez1985 · Post by **Perez1985** » Wed Jan 06, 2016 8:15 am

Instruction manual.txt
1. install.xml copy to : C:\Program Files\EPLAN\Platform\2.5.4\Cfg
2. EPLAN-Start tool.exe and version.dllcopy to: C:\Program Files\EPLAN\Platform\2.5.4\Bin
3. Double-click EPLAN-Start tool.exe
4. OK

This is a text file explaining to cracking. But by following the instructions does not work anyway. Probably it is connected that the settings in install.xml are for Chinese distribution package EPLAN. I changed path in install.xml reach progress bar when you start Eplan. Further I got a fail on the Add-On load. The firm must be Microsoft. If you change a company - no longer run at all.

PDLFFALF · Post by **PDLFFALF** » Wed Jan 06, 2016 8:26 am

1.no
2. Copying version.dll to C:\Program Files\EPLAN\Platform\2.5.4\Bin (Only EPLAN 2.5.4.9380)
3.no
4. OK

Luca · Post by **Luca** » Wed Jan 06, 2016 10:57 am

Unfortunately it's not working for me. I copied the dll in the proper place but it still lags
edit: Chinese forums confirm that it's working. May be it really has to do with a difference between English and Chinese version?

coolenatter1 · Post by **coolenatter1** » Wed Jan 06, 2016 12:28 pm

the download folder is emty !?!

titus95 · Post by **titus95** » Wed Jan 06, 2016 1:11 pm

Thanks, for me it's OK.

Luca · Post by **Luca** » Wed Jan 06, 2016 1:50 pm

titus95 wrote:Thanks, for me it's OK.

What exactly did you do? Only copied the version.dll to C:\Program Files\EPLAN\Platform\2.5.4\Bin ?

I even reinstalled the program, copied the file but still lag occur about every 60 seconds.
I'm doing this on a virtual machine but I doubt that this is the problem.

Edit: the only real difference is that at the start the eplan-eb2.ys168.com opens in the browser..

abelinux · Post by **abelinux** » Wed Jan 06, 2016 2:52 pm

I tried both 'version.dll' files, and none of them work flawlessly for me (w7x64 SP1). Though I believe lagging did reduce (in frequency), I still need to take a deep breath every minute or so...

EDIT: by "both" files I mean the one included in '2016_01_05 EPLAN.rar' and the one in '2016_01_06 EPLAN.rar'.

Has anyone succeded? In which case, what were the steps you followed? Just copying 'version.dll'? Did you re-install 'multikey.exe'?

Luca · Post by **Luca** » Wed Jan 06, 2016 3:21 pm

abelinux wrote:Wooow..! I don't want to get too excited until I can confirm it actually works

For those of us already using EPlan 2.5 (with lag spikes), should we use the files in the zip's "root" (i.e.: multikey, .reg, .egf)?
Or are we supposed to use the files inside the "防卡补丁" subfolder (i.e.: EPLAN.exe, .xml, .dll)?

Does anyone have a clue? Thanks!

Where is this subfolder located? I don't see it