FT 7 Studio - Cannot connect to addin object" 80004005

[Olesia]

Hello dear all.

I have FT 7 View on my PC.

When I open FT 7 Studio I get the following pop-up:
"Cannot connect to addin object Name: Application Handler Cause: 80004005"

And of course FT 7 Studio does not working

Ideas?

Regards,
Olesia.

[NowanH]

Since you are not giving more information like:

• Operative system.
  FTV is a new installation?
  FTV was working ok for several weeks/months?
  Do you installed the FTV patches?
  Other .NET applications in your PC are working correctly?

I only can give you some general recommendations:

• If RSLinx Enterprise is not installed you have to install it.
  If RSLinx Enterprise was updated after install the patches, unistall RSLinx Enterprise and install it again. Finally add the patches.
  If you are using Norton Internet security or McAfee Internet security, disable or uninstall them.
  Verify if all the Rockwell services are running.
  Verify the configuration of FactoryTalk Network Directory.

If you think is too much to do, unistall FTV Studio and RSLinx and install them again.

[Olesia]

Thank you for the answer.

I have upgraded my OS from Windows 8 to Windows 10...

Probably that's why I have a problem... Re-install everything? Or may be FTV does not work with Windows 10.

Olesia.

[NowanH]

You're right. FTView 7 is not compatible with Windows 10. You always can verify compatibility in Rockwell's website, going to Support > Compatibility & Downloads.


http://compatibility.rockwellautomation ... 1487,51486

[Olesia]

Thank you!

You're right. FTView 7 is not compatible with Windows 10. You always can verify compatibility in Rockwell's website, going to Support > Compatibility & Downloads.


http://compatibility.rockwellautomation ... 1487,51486