Hello all,
I was asked to check if there is a PID real - time software which automatically calculates PID loops parameters and update the PLC registers or HMI ( by OPC server etc.) when the process is working and "breathing". REAL-TIME.
Not PID simulator or PID tuner based on measured data,
but a software that will calculate and update the PID parameters in real time while maintaning several PID loops simultaneously.
Are there any suggestions?
Thank you,
Olesia
PID Software - real time tuning
-
- Posts: 157
- Joined: Sat Nov 19, 2005 10:20 am
- Location: Europe