unidrive sp_two motors digital lock/frequency slaving

[honey361]

Hi,

Can you help, I am trying to synchronize two motors with resolver as digital lock, ( With out sm-application)

Synchronization two servo motors with resolver feedback.
MASTER DRIVE SLAVE DRIVE
0.05 A1-A2 0.05 PRC
0.022 ON 0.022 ON
0.023 200 0.023 200
1.18 3000 1.18 3000
1.20 ON 1.20 ON
1.44 ON
3.22 3000 3.22 3000
3.23 ON 3.23 ON
3.40 0 3.40 0
17.24 0.10 17.24 0.10
17.25 0.2500 17.25 0.2500



BUT Slave Motor is not running, where is I am wrong
Thanks in Advance

[proeng]

Hi,

Can you help, I am trying to synchronize two motors with resolver as digital lock, ( With out sm-application)

Synchronization two servo motors with resolver feedback.
MASTER DRIVE SLAVE DRIVE
0.05 A1-A2 0.05 PRC
0.022 ON 0.022 ON
0.023 200 0.023 200
1.18 3000 1.18 3000
1.20 ON 1.20 ON
1.44 ON
3.22 3000 3.22 3000
3.23 ON 3.23 ON
3.40 0 3.40 0
17.24 0.10 17.24 0.10
17.25 0.2500 17.25 0.2500



BUT Slave Motor is not running, where is I am wrong
Thanks in Advance

slave motor is continuous start.
SM-Resolver manuel,
http://www92.zippyshare.com/v/jgUEBMLO/file.html