Unity Pro XL V11.0

[LKMNVRS]

Hello Forum,

I am new to Schneider Unity Pro Software. I got the Unity pro software XL V11.0 from my company & got to know it has to be uninstall after 30 days of trial period & can be installed only after New OS.

If anyone can help me with the serial or crack, it would be great help.

I am not aware of the PLC's in Schneider & I dont know whether the Unity Pro XL 11.0 will communicate with M340. If there any basic manuals in establishing Communication with PLC from Laptop, please share.

What is the hardware (Cable eg: MPI Adapter in Siemens) need to be used with different type of PLC's in Scheneider, i mean connecting from PLC to Laptop.

Thanks Forum.

[alansal]

Hello Forum,
.......
If anyone can help me with the serial or crack, it would be great help.
.
I am not aware of the PLC's in Schneider & I dont know whether the Unity Pro XL 11.0 will communicate with M340. If there any basic manuals in establishing Communication with PLC from Laptop, please share.
.......
What is the hardware (Cable eg: MPI Adapter in Siemens) need to be used with different type of PLC's in Scheneider, i mean connecting from PLC to Laptop.
......

Hello Pal,

I myself don't even have a crack so i may not be able to help in this regard (however you may find licenses for lower versions in forum, do you really need to use the latest software?)
It surely will communicate with M340 as long as you have an ip address.

for different types you can define ip addresses on plc unit manually so over tcp/ip again... is the best... however if you have really too much money to spend you may check for a modbus+ to usb adapter (price about 1.5k€)

=)

good luck

[LKMNVRS]

Hello Friend,

Thanks for your reply.

As I am new to Schneider, I have asked latest version to provide & I don't know, which versions are there & What type of PLC will Support which type of version's.

Presently, I want know whether all the PLC's (Momentum, Quantum, Premium, M340, M580 (is there any other PLC's in this series...?)) will support lower versions Eg: Unity Pro XL 8.0.

If so, Can you please provide me the link for Software download & Crack. Is there any latest version's having the Software & Crack (Please provide). I have already installed Unity Pro XL 11.0, Parallel Can I install Unity pro XL V8.0 too with out uninstalling the V11.0

Whether all the PLC's will Support Ethernet communication in order to avoid the costly USB Adapter. What is the Procedure for communication with TCP/IP..?



Regards,
Raj.

[vilan]

I am not aware of the PLC's in Schneider & I dont know whether the Unity Pro XL 11.0 will communicate with M340. If there any basic manuals in establishing Communication with PLC from Laptop, please share.

What is the hardware (Cable eg: MPI Adapter in Siemens) need to be used with different type of PLC's in Scheneider, i mean connecting from PLC to Laptop.

1. Unity Pro V11 works nice with M340. The easiest way to start is to use USB cable. No need to downgrade V11>V8.

2. https://yadi.sk/d/1rpyQ_JHrrgGy

[LKMNVRS]

Hello Vilan,

Thanks for the Update & link.

Do you have License key for Unity XL V11.0.

I am searching in the forum for the key & i didn't get. I am also searching for Unity Pro XL V8.0 for download with Key.

If your having any link for software download & key, can you help me.

[vilan]

Hello Vilan,

Thanks for the Update & link.

Do you have License key for Unity XL V11.0.

1. follow the link
2. download Unity PRO 11, Unity Loader and the folder "PATCH"
3. mount ISO and run setup
4. when asked, select package version UNYSPUEZTV1X and code 13345618595
5. when installation completes, go to the folder PATCH and unpack it.
6. run prvdisk.exe and install Dekart in trial mode
7. run Dekart in trial mode, connect the file Unity50_1.dpd, password unity50_1
8. run Unity 11, when asked to register choose "transfer the license" and choose the letter assigned to the Dekart drive.

If everything was done as were prescribed, you get the message that the license rights transferred successfully. Enjoy.

BTW Unity 8.0 does not work with Windows 8.1 or higher. So forget it.

[aymeric38]

Thank you very much vilan !

[IsmaelNabil]

Hello Vilan,

Thanks for the Update & link.

Do you have License key for Unity XL V11.0.

1. follow the link
2. download Unity PRO 11, Unity Loader and the folder "PATCH"
3. mount ISO and run setup
4. when asked, select package version UNYSPUEZTV1X and code 13345618595
5. when installation completes, go to the folder PATCH and unpack it.
6. run prvdisk.exe and install Dekart in trial mode
7. run Dekart in trial mode, connect the file Unity50_1.dpd, password unity50_1
8. run Unity 11, when asked to register choose "transfer the license" and choose the letter assigned to the Dekart drive.

If everything was done as were prescribed, you get the message that the license rights transferred successfully. Enjoy.

BTW Unity 8.0 does not work with Windows 8.1 or higher. So forget it.

Thank you very much vilan !

[kb5won]

link above is broken, does anyone have the file available?

[qiwating]

please check the link below, it can download free now.
unity pro xl v11.1 & unity pro xl v13.0

[TuyenNL]

Hi bro! How to bypass password of PLC TSX Micro?

Thanks!

[raytronic]

I am not aware of the PLC's in Schneider & I dont know whether the Unity Pro XL 11.0 will communicate with M340. If there any basic manuals in establishing Communication with PLC from Laptop, please share.

What is the hardware (Cable eg: MPI Adapter in Siemens) need to be used with different type of PLC's in Scheneider, i mean connecting from PLC to Laptop.

1. Unity Pro V11 works nice with M340. The easiest way to start is to use USB cable. No need to downgrade V11>V8.

2. https://yadi.sk/d/1rpyQ_JHrrgGy

is it possible to reupload this ? link is dead

[xubaer]

please check the link below, it can download free now.
unity pro xl v11.1 & unity pro xl v13.0

cant download from the link. Please help. Thanks in advance