Hi everybody, I have previously worked with Fatek PLC and have written some programs that do get inputs from push buttons and sensors then alter outputs. But now I want to use FBs-2LC load cell module with FBs-60 Series PLC, I downloaded load cell module manual (only a couple of pages), read it and configured FBs-2LC module, but the manual is not complete and I have no idea how to access load cell readings and check the weight. I will be happy if someone can help me regarding this problem.
Thanks in advance.
Fatek Load Cell Module
-
- Posts: 1
- Joined: Tue Oct 17, 2017 6:31 pm
Re: Fatek Load Cell Module
Sure u can get help. Manual is complete and simple.
Connect load cells to the card, on card settings define register. Then, run PLC, the data i.e. current weight etc will appear on the register as designated. You can make 0 and full range calibration by moving 0 to a register(The one u selected for zero during setuo).
Connect load cells to the card, on card settings define register. Then, run PLC, the data i.e. current weight etc will appear on the register as designated. You can make 0 and full range calibration by moving 0 to a register(The one u selected for zero during setuo).