[?+]: Weintek XOB file unpassword

raxonyo · Post by **raxonyo** » Tue May 06, 2014 4:48 pm

Hi,
i have a problem, i get project from my hmi. Project is in .xob format. I try to decompile this project to .mtp format using EasyBuilder8000 -> Tool -> Decompile, but i dont have password (default password - 111111 is not correct ). Mayby sombody know possibility to restore password from .xob file ?

vlad2006gr · Post by **vlad2006gr** » Thu May 08, 2014 6:44 am

Send me a project *. Xob format, I decompiled the project and send you.

baduynamduoc · Post by **baduynamduoc** » Thu Aug 21, 2014 1:22 am

I give file project*.pkg format. You can decomplie the project and send me :
baduynamduoc@gmail.com.
Help me. Thanks.
Link file : http://www.data.webdien.com/free/dow...90be216facc2c8

vlad2006gr · Post by **vlad2006gr** » Mon Aug 25, 2014 6:11 pm

file project*.pkg format- This file format program eView- EV5000 from Kinco
See http://www.kinco.cn/html/en/NewsCenter/ ... 28473.html
The format differs from Weintek.

vlad2006gr · Post by **vlad2006gr** » Mon Aug 25, 2014 6:31 pm

baduynamduoc quote:

Link file : http://www.data.webdien.com/free/dow...90be216facc2c8

The file is corrupt and can not be decompiled.

gycu · Post by **gycu** » Tue May 24, 2016 9:30 am

Hello guys,

I have a Weintek MT8121X. I got a xob file from it but when tried to decompile, it asks for password. I tried the default 111111 but did not work. I searched the related topics but could not find anything useful.

Please help me find the password.

Thank you very much in advance.

PS: If needed, I can upload the file.

Post by **Schtiel** » Mon May 30, 2016 7:07 pm

See this topic

gycu · Post by **gycu** » Tue May 31, 2016 12:22 pm

Thanks for the suggestion, Schtiel, but I read that topic (and others) already. Unfortunately, I don't have the*.mtp file, I only have the compiled version (*.xob) which needs to be decompiled first. In order to do this, it asks for password. I downloaded the file from HMI to a USB stick.

Any help would be much appreciated.

LE: This is how I should decompile if I had the password

Code: Select all

http://www.imenista.com/MT8000%20HMI%20FAQ/FAQ_09_How_to_Decompile_the_xob_file_which_uploading_in_the_USB_Disk.pdf

LLE: It could also have the "Decompilation is prohibited" checked though but I'm hoping it wasn't

vlad2006gr · Post by **vlad2006gr** » Tue May 31, 2016 1:51 pm

Poor reading. Again read carefully. Do you have a file *.xob? He needed to get the decompiled file.
Put the file *.xob on a file exchanger.

gycu · Post by **gycu** » Tue May 31, 2016 5:41 pm

Maybe I missed something or I didn't get it.

I sent you a pm.

Thank you, sir!

vlad2006gr · Post by **vlad2006gr** » Wed Jun 01, 2016 4:46 am

gycu wrote:Maybe I missed something or I didn't get it.

See PM.

gycu · Post by **gycu** » Thu Jun 02, 2016 6:13 am

Received it, thank you so much, Vlad, although I have no idea how you did it, you've been a life savior!!!

cheers

pmpatel34 · Post by **pmpatel34** » Mon Jun 13, 2016 5:52 am

Hi,
i have a same problem, i get project from my hmi. Project is in .xob format. I try to decompile this project to .mtp format using EasyBuilder8000 -> Tool -> Decompile, but i dont have password (default password - 111111 is not correct ). Mayby sombody know possibility to restore password from .xob file ?

help

fractal · Post by **fractal** » Fri Jun 17, 2016 1:24 pm

I have same problem.I codnt xob password using hex editor program for decompile.
can you help me to decompile ?
or how can crack xob password?
I have usb backup hmi program.
it has xob password.
so I codunt decompile...

this situation what can I do?..
thans a lot..

vlad2006gr · Post by **vlad2006gr** » Fri Jun 17, 2016 8:36 pm

Download the project (*.xob) to any file sharing, and a link to the forum or pm.

unlockplc · Post by **unlockplc** » Tue Jun 21, 2016 6:08 pm

You can go here: http://unlockplc.com/crack-plc-hmi/
Or send the XOB file to me: unlockplc123@gmail.com

decathlete · Post by **decathlete** » Mon Aug 22, 2016 8:37 pm

Hi.
I downloaded the .xob file from HMI. But file is protected and i can't decompile it.
I open the file in HEX editor but don't find nothing.
In older posts links is dead.
Help me please.

chessbana · Post by **chessbana** » Sat Jan 14, 2017 6:52 am

Hello guys,

I have a Weintek MT6070iH. I uploaded a .xob file from it using EB8000 v4.66 with default password 111111 successfully, but when i tried to decompile, the same password did not work.

Can anyone help me find to find the password or convert it to .mtp file for me?

The .xob file can be uploaded from the following link:

https://files.fm/u/pbt6skt9#_

Appreciate all the help i can get, thanks very much.

vlad2006gr · Post by **vlad2006gr** » Mon Jan 16, 2017 8:49 am

chessbana wrote:but when i tried to decompile, the same password did not work.

Can anyone help me find to find the password or convert it to .mtp file for me?

Take away
https://www.sendspace.com/file/caorhk
Good luck!

chessbana · Post by **chessbana** » Wed Jan 18, 2017 7:01 am

Thanks alot vlad2006gr!!! Can share your method if you don't mind?

khianon · Post by **khianon** » Mon Apr 10, 2017 10:53 am

Hi,
I have same as problem, can,t convert from xob to mtp file.
Can help Me ?

link file:
https://www.dropbox.com/s/y5i2306miuwio ... a.xob?dl=0

Thks
Rgds
Heryanto

vlad2006gr · Post by **vlad2006gr** » Mon Apr 10, 2017 8:31 pm

https://www.sendspace.com/file/nlxado
Good luck!

Panda Gendut · Post by **Panda Gendut** » Wed Apr 12, 2017 3:42 am

Dear Vlad,

Can you also help me to convert to *.mtp ?
https://www.dropbox.com/s/3ss8y9q48nmc6 ... 1.xob?dl=0

Thanks.

vlad2006gr · Post by **vlad2006gr** » Wed Apr 12, 2017 1:32 pm

Panda Gendut wrote:Can you also help me to convert to *.mtp ?

http://dropmefiles.com/8tGME
Good luck!

Panda Gendut · Post by **Panda Gendut** » Wed Apr 12, 2017 4:10 pm

thank you so much

khianon · Post by **khianon** » Wed Apr 26, 2017 4:26 am

Dear Sir,
thanks very much

Rgds
Heryanto

khianon · Post by **khianon** » Tue Jun 06, 2017 2:55 am

Dear Vlad,
Could help me convert file below to weintek mtp file?
https://www.dropbox.com/s/behga8j7klmfz ... a.xob?dl=0

Rgds
Heryanto

vlad2006gr · Post by **vlad2006gr** » Tue Jun 06, 2017 4:35 am

khianon wrote:Could help me convert file below to weintek mtp file?

https://www.sendspace.com/file/fgohzr
Good luck!

khianon · Post by **khianon** » Mon Jun 12, 2017 5:33 am

Dear Vlad,
Many thanks.

Rgds
Heryanto

douyi · Post by **douyi** » Wed Nov 08, 2017 6:15 pm

Dear vlad,

Do you mind convert the xob file to mtp for me as well? Thanks a lot!

Regards,

douyi

https://www.mediafire.com/file/6rra62w5 ... T6100i.xob

vlad2006gr · Post by **vlad2006gr** » Thu Nov 09, 2017 10:07 am

douyi wrote:Do you mind convert the xob file to mtp for me as well? Thanks a lot!

No file....

ccoa · Post by **ccoa** » Fri Dec 15, 2017 8:29 am

Could you decompile this file please.

http://www.mediafire.com/file/8f1gazqg19rs1s5/HMI.xob

aoyon7 · Post by **aoyon7** » Mon Dec 18, 2017 7:20 am

Dear Vlad,
Kindly need your help to decompile the .xob file to mtp? Thanks in advance!

File: https://drive.google.com/file/d/10GHThh ... eK7vB/view

Regards,

Aoyon

toms5758 · Post by **toms5758** » Wed Apr 11, 2018 12:25 am

Dear Vlad,
Could you please decompile this xob files,
https://drive.google.com/open?id=19vhS3 ... ycmv3uUukv

Regards,

Tony

vlad2006gr · Post by **vlad2006gr** » Wed Apr 11, 2018 7:21 pm

toms5758 wrote:Could you please decompile this xob files

see PM

INGELM · Post by **INGELM** » Sat Apr 06, 2019 12:09 pm

Hello,

I performed a back up to a HMI WEINTEK MT6050i, but now I need to decompile de .xob file, I tried with default password 111111 and doesn't work, can you guys help me to find the password?

Thank you in advance

XOB file: https://drive.google.com/open?id=1jkr8d ... Vim42hQzvQ

vlad2006gr · Post by **vlad2006gr** » Sun Apr 07, 2019 8:22 am

INGELM wrote: ↑Sat Apr 06, 2019 12:09 pm I performed a back up to a HMI WEINTEK MT6050i, but now I need to decompile de .xob file

See PM

arunmp11 · Post by **arunmp11** » Mon May 13, 2019 11:47 am

Hello guys,

I have a Weintek tk6070iH. I uploaded a .xob file from it using EB8000 v4.65 with default password 111111 successfully, but when i tried to decompile, the same password did not work.

Can anyone help me find to find the password or convert it

https://drive.google.com/file/d/1VhMzVc ... sp=sharing

ziconltai · Post by **ziconltai** » Mon May 13, 2019 2:49 pm

Hi arunmp11!
Is that a DONGGUAN C-WIN AUTOMATION EQUIPMENT Co,.LTD?

arunmp11 · Post by **arunmp11** » Tue May 14, 2019 3:31 am

Dear sir,

You are absolutely correct. Please send me the password or mtp file for that.

thanking you,
Arun

arunmp11 · Post by **arunmp11** » Sat May 18, 2019 7:26 am

any one can help

arunmp11 · Post by **arunmp11** » Sun May 19, 2019 10:09 am

actual the file was prohibited for decompiling.

any one can do it

Paul7 · Post by **Paul7** » Sun May 19, 2019 3:22 pm

Hello
I have a Weintek MT510TV HMI and when trying to upload it, I was requested a password.
I tried the default password "0" (without the ") and the it did not work.
The PLC was also password protected, yet this number was available. I tried this number on the HMI and it did not work.

Is there a way how to find it?
rgds
Paul

vlad2006gr · Post by **vlad2006gr** » Wed May 22, 2019 5:28 am

Paul7 wrote: ↑Sun May 19, 2019 3:22 pm I tried the default password "0" (without the ") and the it did not work.

default password 111111

arunmp11 · Post by **arunmp11** » Sat May 25, 2019 8:13 am

please help me

Niconora · Post by **Niconora** » Sat May 25, 2019 9:48 pm

Hi
You can´t recover this project, as you said this have unable to decompile.
by the way, if vlad2006gr can´t help you, then forge it.

arunmp11 · Post by **arunmp11** » Sun May 26, 2019 10:56 am

you are correct

and the god will help me sure

ziconltai · Post by **ziconltai** » Tue May 28, 2019 1:46 pm

Paul7 wrote: ↑Sun May 19, 2019 3:22 pm Hello
I have a Weintek MT510TV HMI and when trying to upload it, I was requested a password.
I tried the default password "0" (without the ") and the it did not work.
The PLC was also password protected, yet this number was available. I tried this number on the HMI and it did not work.

Is there a way how to find it?
rgds
Paul

See this Video please
https://www.youtube.com/watch?v=HskX9Pitlhw&t=82s

arunmp11 · Post by **arunmp11** » Thu Jun 20, 2019 6:04 am

all file was cracked

duong23199922 · Post by **duong23199922** » Tue Jul 09, 2019 4:04 am

heloo. i have file program used upload from hmi mt6070ih. i want to open it to view screes and edit, but i not open it. plese help me. thank you.
https://drive.google.com/open?id=14r8_A ... DLkjO1HzPG.