Error Communication PLCSIM.MPI.1

[rhhinc]

Hello everyone,
Does anybody know what my problem during want to simulate program?
Error message is: "cannot load the selected communication drive: file not found"
At the PG/PC interface show PLCSIM.MPI.1, i think this should be PLCSIM.MPI.

Software version: s7 v.5.6
PLC sim v.5.4

File image attached.

error 1 https://spamm.com/a/img924/3142/HrHSm6.jpg
error 2https://spamm.com/a/img922/1807/sOwKw4.jpg

Thanks.

[CoMod]

Show NetPro screencopy of your project

[rhhinc]

Maybe have a problem with my PLCSIM, because at the communication interface, text show not BOLD.
Here i attach screenshoot.

[CoMod]

you not connect PLC to network MPI

[rhhinc]

i already connect to the MPI, but still same problem.
Maybe because i install the PLCSIM separately?

[Info]

see video - all work

[rhhinc]

Based on manual book, the CPU doesn't support with the PG/PC interface. Maybe there is anybody can help me.
Thank a lot.

[CoMod]

Based on manual book, the CPU doesn't support with the PG/PC interface. Maybe there is anybody can help me

see video
all work

[rhhinc]

I already follow your video, and get error when download the program, error said:" cannot load the selected communication driver. File not found"
I think, as a manual book said, the CPU is not accessible

[CoMod]

get error when download the program, error said:" cannot load the selected communication driver. File not found"
I think, as a manual book said, the CPU is not accessible

show your Set PG/PC interface

At the PG/PC interface show PLCSIM.MPI.1, i think this should be PLCSIM.MPI.

Windows 7/10 ?
Step7 version ?

[rhhinc]

Software version: s7 v.5.6
PLC sim v.5.4
Windows 7 Professional SP1 64bit.

Maybe because i install PLC sim separetly?
First, i install s7 v.5.6 after finish the instalation and restart the computer, then i install plcsim. Maybe because of that?

[CoMod]

reinstall ALL from viewtopic.php?f=1&t=25245

STEP7 Professional 2017 with STEP 7 V5.6 HF1
https://support.industry.siemens.com/cs ... ry-release
https://support.industry.siemens.com/cs ... al-license

[rhhinc]

here now, i get error when try to install plcsim.