Hello!
There is a Kewei LP1-08M08P PLC. I can not connecting for upload parameters from PLC.
http://www.kwzk.com/Introduce.asp?id=42 ... %B5%C1%D0
On the manufacturer’s page there is a scheme for connecting to COM0. I connected to PLC is KWPro v1.2.4.8 software. I used the mini DIN 8 connector (AF-2180 (MDN-8M) (KLS1-294-M-8-B). I used the RS232 (RX and TX signal) for connecting in USB-COM adapter ICPCON i-7561.
What am I doing wrong and how to connect to the PLC?
Kewei LP1-08M08R
-
o090yy26
- Posts: 1
- Joined: Mon Jun 27, 2022 9:32 am
- Location: Россия
Re: Kewei LP1-08M08R
Good afternoon, forumchane! Does anyone happen to have firmware for PLC Kewei LP1-08M08P??? Maybe someone was draining. And then the PLC broke down recently, it was restored, but the firmware flew off. The cable was made according to the scheme, the firmware was downloaded, but there is no firmware itself. 