- DOC5 display of block stack inconsistent, because blocks were deleted/reload.
https://drive.google.com/drive/u/1/my-drive.
I hope you who have met this error can give me a method,
Thanks you, every one.The DOC5 ERROR
-
minhquan3004
- Posts: 1
- Joined: Mon Feb 17, 2020 8:33 am
The DOC5 ERROR
hello everybody, I'm Quan, I know this forum into some page on facebook, this is first time I up load this post, I have a problem with my PLC program. and when i run the simulation after that i change the status of I0.0 but the memory bits m0.0 not changes. and the diagnostic system said :
- DOC5 display of block stack inconsistent, because blocks were deleted/reload.
https://drive.google.com/drive/u/1/my-drive.
I hope you who have met this error can give me a method,
Thanks you, every one.
- DOC5 display of block stack inconsistent, because blocks were deleted/reload.
https://drive.google.com/drive/u/1/my-drive.
I hope you who have met this error can give me a method,
Thanks you, every one.-
sania
- Site Admin
- Posts: 1387
- Joined: Sat Aug 13, 2005 6:15 am
Re: The DOC5 ERROR
cpu order number?
program and simulator version?
where are you change the input status?
program and simulator version?
where are you change the input status?