Hello all
I am trying to communicate with the hmi through 19.2k baudrate with no succes only 187.5k is working
Dont know why?
And mpi/profibus setting in hmi
The hmi dosn't accept 19.2k baudrate
Once i choose 19.2k baudrate it go back to 187.5k
And the plc program baudrate is 19.2 k
Any explaintion
Tp 177 A HMI
-
Dfcz
- Posts: 878
- Joined: Tue Dec 26, 2006 5:21 am
- Location: Russia
Re: Tp 177 A HMI
Why connect at a slow speed when you can connect at a high speed?
-
pegaso65
- Posts: 2
- Joined: Fri May 15, 2015 12:08 pm
Re: Tp 177 A HMI
the speed is set in the project, can't set it on panel