I want to convert the (Flexem HMI Fstudio).fpg document into a project. I'm getting the following error: ''forbidden''.
Is there any other a way?
FLEXEM HMI DECOMPİLE
-
Junkok
- Posts: 19
- Joined: Thu Dec 29, 2016 7:10 am
Re: FLEXEM HMI DECOMPİLE
I think that before compiling the project, set the checkbox in System Settings to allow decompilation.
-
zakyol
- Posts: 3
- Joined: Mon Feb 29, 2016 2:32 pm
Re: FLEXEM HMI DECOMPİLE
Hello,
The project is lost, I only have the ''.fpg'' file. The decompile option was not selected while compiling.
The project is lost, I only have the ''.fpg'' file. The decompile option was not selected while compiling.
-
Junkok
- Posts: 19
- Joined: Thu Dec 29, 2016 7:10 am
Re: FLEXEM HMI DECOMPİLE
I myself have never worked with these HMI. Now there is a need for a small change in the project, and I only have a compiled project and a password only for downloading. I'm looking for how to break the decompilation password.
Perhaps you have the Upload function enabled and the standard password is “888888”.
Perhaps you have the Upload function enabled and the standard password is “888888”.
-
zakyol
- Posts: 3
- Joined: Mon Feb 29, 2016 2:32 pm
Re: FLEXEM HMI DECOMPİLE
Upload the project to google-drive and send the link. let me see.
-
Junkok
- Posts: 19
- Joined: Thu Dec 29, 2016 7:10 am
-
BHULLAR
- Posts: 1
- Joined: Tue Feb 25, 2025 8:11 pm
Re: FLEXEM HMI DECOMPİLE
Hi there
we have got mitsubishi plc and Flexem hmi 6156h model from china. we were trying to add and edit some AI on plc. we have done successfully on plc but we cant decompile .fpg file. It says forbidden.
Anyone knows how to crack this file?
we have got mitsubishi plc and Flexem hmi 6156h model from china. we were trying to add and edit some AI on plc. we have done successfully on plc but we cant decompile .fpg file. It says forbidden.
Anyone knows how to crack this file?