Hello
I have an old Fuji NJ-CPU-B16, i have no clue if the D-sub15 or RJ-45 port is used for connection to Flex PC Programmer soft i found V2.1.1. So far trying both doesn't connect.
The RJ45 to d-sub9 i made according to NN-CNV3 pinout cable i found on Google. The D-sub15 to d-sub9 is with help from PLC pinout from manual, same way RD/SD sapped and GND pin, with flow control on d-sun9 side bridged.
And nothing... anyone had any luck or experience or know what cable/pinout to use?