Good day.
There is an encoder with 5 wires:
Red 5VDC
Black 0V
Yellow CSN
Green CLK
White DO
In its description there is a mention: Output signal type SSI or RS485.
There is a PLC with the following inputs:
D4+ Data receive +
D4- Data receive -
C4+ Clock send +
C4- Clock send -
24V +24V power supply
0V Common terminal of power supply
24V-1 Supply +24V power supply to the encoder
0V-1 Common terminal of power supply for encoder
SH0 Connect encoder shielded ground
SH1 Connect encoder shielded ground
It is understood that power is supplied to the encoder separately 5VDC.
How to connect the data receiver, clock send and CSN, CLK, DO?