Hello everyone,
I have an OMRON CP1L-M60DR-A PLC protected with:
AR99.00 = 1
AR99.01 = 1
AR99.02 = 1
AR99.03 = 1
AR99.04 = 1
THEREFORE : AR99 = 001F
The last bit AR99.04 is not documented in the Omron PDFs
and with this protection, the program area is read- and write-protected.
I even tried with applications that find passwords, but it doesn't work.
Please, can someone help me?
Top
How to unlock CP1L (The program area is protected)
-
ksvitae
- Posts: 4
- Joined: Mon May 25, 2020 6:05 pm
-
defo2004
- Posts: 86
- Joined: Wed Aug 05, 2015 5:33 am
Re: How to unlock CP1L (The program area is protected)
Hi!
Your controller is protected to the maximum, all protections are enabled, for reading, tasks, copying to the card, overwriting the program, A99 = F, and enhanced A99 protection is also enabled.03 = 1 Total : A99 = 001F All known programs cannot bypass enhanced protection , other methods and tools are needed here ...
I can sympathize with you..
Your controller is protected to the maximum, all protections are enabled, for reading, tasks, copying to the card, overwriting the program, A99 = F, and enhanced A99 protection is also enabled.03 = 1 Total : A99 = 001F All known programs cannot bypass enhanced protection , other methods and tools are needed here ...
I can sympathize with you..