Can anyone please assist me in motosim programming for my cad model.
I have the motosim Software but yet difficult to proceed for advanced process in checking robot welding feasibility using yaskawa robot
Kindly DM me
Thanks brothers
Motosim Programming
-
Soloman lane
- Posts: 5
- Joined: Tue Oct 29, 2024 9:35 am
Re: Motosim Programming
Since working as fixture model designer, i have to check the weld feasibility and I'm new to robot programming.
i dont know how to start with the positioners and robots, i need additional support other than the yaskawa playlist.
Or which kind of tutorial i have to focus and understand the basic principles.
Also the sim robot has to function based on signals from clamps (not actual signal..kinda simulated one) so how can i interface my clamps and cylinders with plc to work accordingly by feedback.
Is any other way to simulate without plc interfacing.
Another thing to mention here is i dont have robot and plc.
Only i have softwares only.
Thanks
i dont know how to start with the positioners and robots, i need additional support other than the yaskawa playlist.
Or which kind of tutorial i have to focus and understand the basic principles.
Also the sim robot has to function based on signals from clamps (not actual signal..kinda simulated one) so how can i interface my clamps and cylinders with plc to work accordingly by feedback.
Is any other way to simulate without plc interfacing.
Another thing to mention here is i dont have robot and plc.
Only i have softwares only.
Thanks