[help] Simovert VC

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Forum rules
most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

[help] Simovert VC

Post by most »

i have 3 Simovert VC 6SE7032-6TG60-Z but i dont no what means the letter "Z"

can you help me
many thanks

most
Top
CoMod
Site Admin
Posts: 3992
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia

Post by CoMod »

Z - is option
http://support.automation.siemens.com/W ... n/22497258
siemens wrote:6SE7026-0ED61-Z, Z = K80 has a 9-pin terminal strip -X9
http://support.automation.siemens.com/W ... n/23652893
siemens wrote:Option M68 can only be assigned to the CleanPower filter - not the AFE line basis module. ( refer to the table below ).

If supplementary data Z=M68 is not specified, then only the CleanPower filter is supplied.

Ordering example: CleanPower-Filter 92A 400V plus Option M
Top
most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Post by most »

very fast on help :D
thanks

most
Top
Le Hoang Trieu
Posts: 1
Joined: Fri Dec 08, 2006 2:51 am
Location: Vietnam

Re: [help] Simovert VC

Post by Le Hoang Trieu »

anybody have Simovis software or download link.
tks pls
Top

Return to “SIMATIC system”