[LINK]: MMC Start-Up *ALL* versions

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Bloster
Posts: 8
Joined: Tue Nov 07, 2006 11:23 am
Location: Europe

[LINK]: MMC Start-Up *ALL* versions

Post by Bloster »

I've uploaded MMC Start-Up (all versions) for all those who may need this MMC emulator for 840D :wink: .


Versions 3.7, 4.3, 4.4, 5.1, 5.2, 5.3, + various patches [372MB]
Useful for older windows versions (95-98 ); if you have those versions with poor hardware resources you should try one of these.
I had to split the whole archive in 3 parts, just use winrar to unpack.

http://filesfly.com/f/7b3659b510_150MB
http://filesfly.com/f/fb3526e619_150MB
http://filesfly.com/f/cd0414092d_72.05MB


Versions 6.1 [253MB]
This should be compatible with Windows98 and 2000.
Always install all latest Windows Service Pack.

http://filesfly.com/f/7453924230_252.83MB


Versions 6.2 [263MB]
This works with XP SP2 (tested). Some issues have been reported with Windows 2000 with poor RAM (at least 512MB suggested).
Surprised? Nah! You know: siemens sucks!

http://filesfly.com/f/b499035c7c_262.93MB


This is my small tribute for this great forum.
Hope this will be of some help to somebody.


:idea: If you have any other version, let me know! :idea:
guimaraes
Posts: 2
Joined: Thu Oct 09, 2014 7:27 pm

Re: [LINK]: MMC Start-Up *ALL* versions

Post by guimaraes »

Hello,

Could you upload the MMC again, please?

Thank you
:D