We need Licence for Trend Viewer v 3.0 from ICSGMBH
Tank You
You find the demo version here.
http://www.icsgmbh.de/english/GdcXyeR.htm
Request: Trend Viewer v.3.0
-
maverik53
- Posts: 53
- Joined: Thu Oct 27, 2005 3:13 pm
- Location: Europe
Request: Trend Viewer v.3.0
Last edited by maverik53 on Thu Jan 11, 2007 1:35 pm, edited 1 time in total.
-
ppp
- Posts: 268
- Joined: Thu Feb 09, 2006 6:52 am
- Location: Russia
In due time studied this product. It is too much opportunities at it it has been declared on display of schedules.
And other products of this firm are executed quite professionally and unique.
But this has not liked me TrendViewer.
The product with adjustments in the form of ActiveX is necessary to me.
Built in in wincc a viewer as it has appeared to use a hundred times more conveniently (though and a little there adjustments)
The majority of adjustments in TrendViewer is possible only commands in the form of functions C.
Without server TrdDBServer (from the same firm) it will not work. And one license will not rescue you.
At the manufacturer has elicited (from the tenth attempt) the project for WinCC v5.0, its complexity has not liked.
One access to data through ODBC that costs on complexity.
At me in all average project for that moment was as much scripts, how many they used for display of 5 tags (16 pieces total amount 32кБ)
All is not evident and with mistakes at work.
In my opinion it is easier activeX to write than repeat the something similar.
All aforesaid concerns to TrendViewer v2.
The third version did not look, but I do not think that essentially have changed something.
On official site TrendViewer now it is not specified even not, that it can be used with WinCC (was earlier)
In my advice - hammer on this product. It was written initially not for WinCC, and for developers as environment, therefore in WinCC so uneasy and to use it...
And other products of this firm are executed quite professionally and unique.
But this has not liked me TrendViewer.
The product with adjustments in the form of ActiveX is necessary to me.
Built in in wincc a viewer as it has appeared to use a hundred times more conveniently (though and a little there adjustments)
The majority of adjustments in TrendViewer is possible only commands in the form of functions C.
Without server TrdDBServer (from the same firm) it will not work. And one license will not rescue you.
At the manufacturer has elicited (from the tenth attempt) the project for WinCC v5.0, its complexity has not liked.
One access to data through ODBC that costs on complexity.
At me in all average project for that moment was as much scripts, how many they used for display of 5 tags (16 pieces total amount 32кБ)
All is not evident and with mistakes at work.
In my opinion it is easier activeX to write than repeat the something similar.
All aforesaid concerns to TrendViewer v2.
The third version did not look, but I do not think that essentially have changed something.
On official site TrendViewer now it is not specified even not, that it can be used with WinCC (was earlier)
In my advice - hammer on this product. It was written initially not for WinCC, and for developers as environment, therefore in WinCC so uneasy and to use it...
Russian wrote:В свое время изучал этот продукт. Уж больно много возможностей у него заявлено было по отображению трэндов. Да и другие продукты этой фирмы выполнены вполне профессионально и единственные в своем роде.
Но не понравился мне этот TrendViewer.
Мне (как и большинству винсисишных писателей) нужен продукт с настройками в виде ActiveX.
Встроеный в wincc вьювер как оказалось использовать в сто раз удобнее (хотя и маловато там настроек)
Большинство настроек в TrendViewer возможно только командами в виде сишных функций.
Без сервера TrdDBServer (от той-же фирмы) он работать не будет. И одна лицензия вас не спасет.
У производителя выцыганил (с десятой попытки) проект для WinCC v5.0 (там на сайте есть мыло автора), так ужаснулся его сложности.
Один доступ к данным через ODBC чего стоит по сложности.
У меня во всем среднем проекте на тот момент было столько же скриптов, сколько они использовали для отображения 5 тэгов (16 шт общий объем 32кБ)
Все не наглядно и глючно.
По-моему легче свой activeX написать чем повторить что-то подобное.
Все вышесказанное относится к TrendViewer v2.
Третью версию не смотрел, но не думаю что принципиально что-то изменили.
На официальном сайте TrendViewer сейчас даже не указано, что его можно использовать с WinCC (раньше было)
Мой совет - забейте на этот продукт. Писался он изначально не для WinCC, а для разработчиков как среда, поэтому в WinCC так непросто и использовать его...
-
aerogard
- Posts: 1
- Joined: Sat Nov 10, 2007 4:55 am
- Location: Australia
Well, this was posted _only_ in Marchmaverik53 wrote:Any news?
Anyways, I made these licences for someone (both Trendviewer and Analyser) on a very boring, rainy day. Some folks may utilize them.
D/load:
*http://mihd.net/yfu1e0
then put them into their respective directories.
Cheers
-
votuandktd
- Posts: 58
- Joined: Sun Aug 13, 2006 12:51 pm
- Location: Vietnam
I need licence for PicCAD. Anyone have, please upload.Well, this was posted _only_ in March
Anyways, I made these licences for someone (both Trendviewer and Analyser) on a very boring, rainy day. Some folks may utilize them.
D/load:
*http://mihd.net/yfu1e0
then put them into their respective directories.
Cheers
Many thanks,
-
maverik53
- Posts: 53
- Joined: Thu Oct 27, 2005 3:13 pm
- Location: Europe