[?]: Use the ePlan crack with my own serialnumber.?!

Garog · Post by **Garog** » Tue Jul 03, 2007 7:00 am

hello.

is it possible to use the crack for eplan 5.7 or P8 with my own serial.

i only want to work without my hardlock.
want to use the original serial.
because you see the number in the options from the sites and my costumers must see it.

Post by **Schtiel** » Tue Jul 03, 2007 10:05 am

Try to do the following:

1. Create backup of your original serial number file (SN-XXXX.EPL in your Windows directory)
2. Apply crack from this topic. It will patch file Lclic32.dll to remove hardlock check and put it's own serial SN-.EPL to open all Eplan options.
3. Delete SN-.EPL from your Windows directory
4. Put your original SN-XXXX.EPL into your Windows directory

Hope it will work

Garog · Post by **Garog** » Wed Jul 04, 2007 1:22 pm

but the "emulated" hardlock is using another serialnumber.
the program says only...
No Adapter found for this license.

with the "cracked" *.epl it is working.

Garog · Post by **Garog** » Fri Jul 06, 2007 3:23 pm

*fixed*

http://plc.net.ru/viewtopic.php?t=6207