[?]: Bosh Rexroth software

[DAS]

Hi everybody!

I have following system manufactured by Bosh Rexroth:

IndraDrive control CSH01.1C-PL-EN2-NNN-... with MMC card + touch panel VCP 11.1
I need the soft for these to have a possibility to change, for the first, the parameters of the drive and second - a little change the program on the panel.
Do anybody know where to get it? I need it very much!
Thanks a lot!!!

---------------------------------------------

Привет всем!

Имеется следующая система производства Bosh Rexroth:

IndraDrive управляющая силовая часть CSH01.1C-PL-EN2-NNN-... with MMC картой памяти + сенсорная панель VCP 11.1
Нужен софт под енто все дело, чтоб параметры управления двигателем поменять и адаптировать програмку панели под параметры.
Есть у кого-нибудь эта софтина? Очень надо!
Большое сенькс!

Some minutes ago I've found some soft on Bosh site - WinStudio 6.5. Does anybody know, it's what I need? Or what is that soft for?

Вот нашел на сайте Боша - WinStudio 6.5. Кто-нить знает, это то что надо? Или для чего он?

--------
3:43 |
--------
Think I've found the correct soft - IndraWorks. But where to get it? And the license ... ?

Думаю я нашел, то что надо - IndraWorks. Вот только где его достать и как быть с лицензией?

[serdarizbudak]

You need Drivetop Software and VİComposer .
Drivetop on web : http://www.boschrexroth.com/business_un ... /index.jsp.

[DAS]

Thanks!
And what about VIcomposer? There is only Service Pack for one on the bosch-rexroth site.
Really nobody have worked with such hardware?

Спасибо!
А как насчет VIcomposer? Там на сайте токо сервис пак для оного.
Неужели никто не работал с таким железом?

[swallate]

Does anybody have "Motion Manager" software for CLM?

[most]

go to ftp://hao888:hao333@hao009.3322.org:65530
folder delete and download "Bosch.Rexroth.Indraworks.v7.04.WiNNT2K-oDDiTy"
in emule you find full software, 3 cds
most

[swallate]

Thanks, sir.Good luck.

[zrfengplc]

I need Rexroth MAC8 System Software ECL-Win and manual, PPC Software VisualMotion and manual.

Thank you.

[rator]

I've download indraworks 7.0.4 but I can't find the motion manager, can you help me please?

[cook]

Hello,

Somebody has a new of Indraworks version which works under Windows 7 ?

Thanks !

[MRT_RYLMZ]

I can share my Indraworks V11 copy, but I don't have a rapidshare or like another user account. In fact, I can upload this files if I don't need a premium user rights. Please give me an advice how it can be done

[sania]

upload to rapidshare & send link in PM to admins
you can see viewtopic.php?t=4977

[Umencho]

Some news here?

[khatana]

Dear All,
i need Bosch Rexroth Indramate Visual Motion 10 software for drive software.
Looking forward for solution....

[khatana]

Anyone have solution plzzzzzzzzz

[khatana]

Still waiting

[morvin13rus]

I also need Bosch Rexroth Visual Motion 10 software for the PPC-R22.1 PLC. Please give a link or write where to look

(Мне тоже нужна программа Bosch Rexroth Visual Motion 10 для ПЛК PPC-R22.1. Дайте пожалуйста ссылку или скажите где искать.)

[pacotabaco]

Re-update.

Has anyone a link of Visual Motion (Indramat-Rexroth) ? If you could send me a pm it would be so helpful.

Thanks in advance.

[mavilip236]

Hi, i'm looking for VisualMotion 6.0. Anybody?

[curator]

I am also looking for this software-VisualMotion 6.0
danyone have it?

[daniel0418]

Hi,
I am looking for VisualMotion 11v06 (R911309195) with Indralogic 1.6. for PPC-R22.1. SWA-VMT*PC-INB-11VRS-D0-CD650

[daniel0418]

Hi. Anyone have VisualMotion 11v06 (R911309195) with Indralogic 1.6. for PPC-R22.1. SWA-VMT*PC-INB-11VRS-D0-CD650

[Henke]

Does anyone have visual motion software?

thanks in advance!