[Link]: software Gp-proEX v2.0 full+ serial

Casper · Post by **Casper** » Thu Oct 25, 2007 2:26 pm

http://ctyhuyvietltd.googlepages.com/home

xf2000 · Post by **xf2000** » Sat Oct 27, 2007 2:30 pm

the software was deleted by the administrator of MageUpLoad. can not download

Casper · Post by **Casper** » Sat Oct 27, 2007 3:13 pm

All download slots assigned to your country (China) are currently in use. Please try again in a few hours or install the Megaupload Toolbar for immediate access - with the toolbar installed, there are no more slot limitations for you!
The Megaupload toolbar was developed to make your uploads
faster and more convenient. It is available to all Megaupload users free of charge.

in Russian wrote:В настоящее время все ресурсы загрузки, выделенные для вашей страны (Russian Federation) уже используются. Повторите попытку через несколько часов или установите панель инструментов Megaupload, чтобы получить немедленный доступ к загрузке. После установки панели инструментов ограничение снимается!

Murphy · Post by **Murphy** » Sun Oct 28, 2007 12:16 pm

Hi,
It works but some files are missing, specialy the crc file wich has been deleted by megaupload for rules infrigements. Other missing parts (no links on your web page) are #15, #18, #59 and #68. Thanx anyway for the sharing.

JC

Casper · Post by **Casper** » Sun Oct 28, 2007 2:17 pm

http://www.megaupload.com/?d=5MDU1NJM #68
http://www.megaupload.com/?d=U8CGD28W #59
http://www.megaupload.com/?d=D40MH2ZN #15
http://www.megaupload.com/?d=JNOWZHXH #18

gremlin · Post by **gremlin** » Sun Oct 28, 2007 3:44 pm

can ayone be kind enough to put this on rapidshare !
thanks
all for all your help in makeing this a cool site

Murphy · Post by **Murphy** » Sun Oct 28, 2007 6:48 pm

It seems part #51 and #52 don't have links too on your webpage. Is part #74 the last part of the serie ?

JC

Casper · Post by **Casper** » Mon Oct 29, 2007 10:07 am

total : 111file?

http://www.megaupload.com/?d=ZYIPEWGR #52
http://www.megaupload.com/?d=7I7CB2BI #51

Murphy · Post by **Murphy** » Mon Oct 29, 2007 1:06 pm

Hi,
Sorry i had an incomplete webpage in memory so i didn't see all the files. Now it's ok i got all files except part #104 wich is not on the page. In fact you have twice links for the #103 parts. Except this one i think its ok.

JC

cuervo2k · Post by **cuervo2k** » Mon Oct 29, 2007 7:08 pm

Do you have any file 104?

Casper · Post by **Casper** » Tue Oct 30, 2007 1:38 am

thanks, i'm sorry

http://www.megaupload.com/?d=JBY8GXQ3 #104

cuervo2k · Post by **cuervo2k** » Tue Oct 30, 2007 5:32 am

Anybody able to decompress? I gathered files with the totalcommander and is still decompressing

Murphy · Post by **Murphy** » Tue Oct 30, 2007 8:03 am

Well i got all parts but there's a crc error at the end of the combination by Total commander. So the zip file is created but it's altered. Maybe some parts are corrupted ?

JC

cuervo2k · Post by **cuervo2k** » Tue Oct 30, 2007 7:50 pm

Hello, I uploaded GP-PRO EX V2.00.1 that I have, the problem is that I dont have the key.

Casper if you type the key and the authorization, please

thanks

the links:

http://plcforum.uz.ua//GP ... 2.00.1.CRC
http://plcforum.uz.ua//GP ... 2.00.1.001
http://plcforum.uz.ua//GP ... 2.00.1.002
http://plcforum.uz.ua//GP ... 2.00.1.003
http://plcforum.uz.ua//GP ... 2.00.1.004
http://plcforum.uz.ua//GP ... 2.00.1.005
http://plcforum.uz.ua//GP ... 2.00.1.006

gremlin · Post by **gremlin** » Tue Oct 30, 2007 10:50 pm

is that all of the files on rapidshare as i get an error ?
once i get it open i will find a reg # for you

all the best

gremlin

cuervo2k · Post by **cuervo2k** » Fri Nov 02, 2007 7:53 am

Casper, can you put the serial for all please?

gremlin · Post by **gremlin** » Fri Nov 02, 2007 1:08 pm

open it yet !
missing files etc
as soon as i get a full download i can find a serial # that will work

cheers

gremlin

adi · Post by **adi** » Sat Nov 03, 2007 3:20 pm

please upload file 112 until the last file
thank you

Casper · Post by **Casper** » Sun Nov 04, 2007 9:42 am

no file #112, last file: #111 and #.crc, thanks

adi · Post by **adi** » Sun Nov 04, 2007 10:48 am

hi Casper
please tell me the link below what link are good link because I can not combine file.
I use total commander, in the end threre have message [warnning created file fail CRC check]

#17 http://www.megaupload.com/?d=0IK91YLW
#17 http://www.megaupload.com/?d=EICVE2FJ
and
# 25 http://www.megaupload.com/?d=CJB5WN50
# 25 http://www.megaupload.com/?d=Q1ZYD7M7
and
#75 http://www.megaupload.com/?d=Q82E3IQA
#75 http://www.megaupload.com/?d=O6NDFJJL
#75 http://www.megaupload.com/?d=9F0W66PY
and
# 76 http://www.megaupload.com/?d=CZ07I
http://www.megaupload.com/?d=TMHPP4IN
and
# 103 http://www.megaupload.com/?d=EYSL2EBY
http://www.megaupload.com/?d=EYSL2EBY
thank you again
adi

gremlin · Post by **gremlin** » Sun Nov 04, 2007 11:01 am

hi
any chance of a fresh upload to rapidshare so we can sort you out reg #
all the best

gremlin

cuervo2k · Post by **cuervo2k** » Thu Nov 08, 2007 9:03 pm

http://plcforum.uz.ua//GP ... 2.00.1.CRC
http://plcforum.uz.ua//GP ... 2.00.1.001
http://plcforum.uz.ua//GP ... 2.00.1.002
http://plcforum.uz.ua//GP ... 2.00.1.003
http://plcforum.uz.ua//GP ... 2.00.1.004
http://plcforum.uz.ua//GP ... 2.00.1.005
http://plcforum.uz.ua//GP ... 2.00.1.006

S/N 35550610206
Key Code 2590-1505-1007

gremlin · Post by **gremlin** » Thu Nov 08, 2007 10:54 pm

what was it compresed with. as Total commander comes back with a disk error when unpacking ?
any ideas ?

cheers

gremlin

gremlin · Post by **gremlin** » Thu Dec 06, 2007 10:36 pm

still no joy opening these files
does any one havea working version with a code and key

regards

gremlin

jamrobe · Post by **jamrobe** » Wed May 07, 2008 7:26 am

Thanks cuervo2k,

Works just fine.

for gremlin:
I used hj-join (Join32.exe) to link the files and 7-zip to extract the archive to ISO, WinImage to mount.

Cheers all and keep up the good work.
Jam

Casper · Post by **Casper** » Mon May 12, 2008 12:29 am

Gx developer 8.3

http://anhthanh2009.googlepages.com

or

http://ctyhuyvietltd.googlepages.com

most · Post by **most** » Sun Oct 26, 2008 9:17 pm

i found this 'GP PRO EX 2.2'
but with out serial anf key, someone provide this?
by felsister
http://www.mediafire.com/?sharekey=55c2 ... bf803dce36

PLCforum.uz.ua

[Link]: software Gp-proEX v2.0 full+ serial

[Link]: software Gp-proEX v2.0 full+ serial

you see!

no file #112

new Gx developer 8.3