[KEY]: Key for Schneider OFS (OPC factory Server V3.31 L)

zenchek · Post by **zenchek** » Mon Nov 05, 2007 7:16 pm

Who would like to share key for Schneider Electric OFS ( OPC Factory Server V3.31 Large. )?

Thanks in advance.

zenchek

KSerg · Post by **KSerg** » Sat Nov 10, 2007 2:45 pm

You can try serial for OFS V3.3:
serial: 21063301323
part number: TLXCDSUOFS33

the correct serial is:
part number: TLXCDLUOFS33
serial: 21063301323

zenchek · Post by **zenchek** » Sat Nov 10, 2007 5:27 pm

KSerg wrote:You can try serial for OFS V3.3:
serial: 21063301323
part number: TLXCDSUOFS33

Very thanks KSerg, but other number named AUTHORIZATION CODE is necessary too.
Regards zenchek

c0den · Post by **c0den** » Sat Nov 10, 2007 6:57 pm

After 5 minutes of fine analisys ... try this:

Use UnityKeygen_noRelease
Type the EntryNo and the ComputerID as the registration Tool sugests...

The field AuxNo, type the number 532 (and not the 700).
Pick the number in the middle...

Tada!

Ps. Tested it here, and work´d.

c0den.

zenchek · Post by **zenchek** » Sat Nov 10, 2007 7:28 pm

Many thanks cOden,
the medicine have instant positive effect.
Best regards.
zenchek

Post by **Schtiel** » Sat Nov 10, 2007 8:19 pm

cOden, thank you very much!
Can you help us with Schneider's SCADA Monitor Pro? Is it possible to use your great keygen for it?

c0den · Post by **c0den** » Sat Nov 10, 2007 8:42 pm

Hum... i´ve looked around here... but i dont have this app here....
Share the link and I see what I can do for ...

c0den

most · Post by **most** » Sun Nov 11, 2007 2:08 pm

hello c0den
Thanks for your keygen, it is useful...
can you adapt this keygen for Proworx32 by Sch of this link:
http://www.telemecanique.com/85256DCC00 ... enDocument
many thanks
most

c0den · Post by **c0den** » Sun Nov 11, 2007 2:12 pm

http://download.telemecanique.com/Repos ... group10~EN

look at and see that ther´s a 2.0 version, and also it´s a version that i do have it here... well... i´m going to see what I can do (for the 2.0 version) ...

c0den.

niila · Post by **niila** » Sun Nov 11, 2007 2:24 pm

Schtiel wrote:cOden, thank you very much!
Can you help us with Schneider's SCADA Monitor Pro? Is it possible to use your great keygen for it?

hi friends..
you can try below link , it will probably successful

115110NA
B7IN GD2H Q45R PDDN VU3I ENSD TAEF BAK8 3D
EXFT VD6S 3TIX 4GQW H3DS J32C NC

most · Post by **most** » Sun Nov 11, 2007 3:07 pm

c0den wrote:http://download.telemecanique.com/Repos ... group10~EN

look at and see that ther´s a 2.0 version, and also it´s a version that i do have it here... well... i´m going to see what I can do (for the 2.0 version) ...

c0den.

i will download the V2.0, i didn´t know your link
many thanks for your work
most

c0den · Post by **c0den** » Sun Nov 11, 2007 4:10 pm

Go to http://download.telemecanique.com and you´ll find it.

Well, i´m now analysing it, it appears to be the same thing as the Unity and to the OFS.

Wait for results.

------- snip ------------

All right... I got it again...
I´m going to post a Modified version of CrackUnity, it worked again to the ProWORX32 (v2.00), but I had to change a few things to CrackUnity Code.

Just wait a bit.

------- snip ------------
Here´s the link, it has support for OFS, UnityPro, and also for the ProWORX32. Try it, i´ll delete the file at end of the day for security reasons.
-- Link Deleted !! --
http://plcforum.uz.ua//Ke ... E.rar.html

c0den

c0den · Post by **c0den** » Sun Nov 11, 2007 5:12 pm

Ok fellows

I´ve given to you one nice keygenerator for Schneider´s best appz, now it´s time to have some feedback ... I need the keygen for GENESIS32!!!

c0den

most · Post by **most** » Sun Nov 11, 2007 6:14 pm

c0den wrote:
http://plcforum.uz.ua//Ke ... E.rar.html

c0den

ok. the program is autorized.
tomorrow i will test online with PLC to verify if i have more than 25 networks
(I go to try to find something for genesis32)
many thanks
most

Post by **Schtiel** » Sun Nov 11, 2007 7:02 pm

niila wrote: hi friends..
you can try below link , it will probably successful :D

115110NA
B7IN GD2H Q45R PDDN VU3I ENSD TAEF BAK8 3D
EXFT VD6S 3TIX 4GQW H3DS J32C NC

But this are only serials... Activation code depends from PC configuration. A keygen is necessary... Please help...

c0den wrote: Share the link and I see what I can do for ...

Thanks! I'll try to upload it as soon as possible.

c0den · Post by **c0den** » Sun Nov 11, 2007 8:25 pm

About the 25 Networks... Hum, try the second key that the program returns, the Screen has disapeard after inserted the 2nd key. (it was appearing with the 1st).

c0den

most · Post by **most** » Sun Nov 11, 2007 9:07 pm

c0den wrote:About the 25 Networks... Hum, try the second key that the program returns, the Screen has disapeard after inserted the 2nd key. (it was appearing with the 1st).

c0den

yes already it had seen. with the first number it is autorized but the mesage does not disappear, with de second number,Yes, the mesage go out. I go to try online tomorrow and i say some thing

regards
most

----------------------------------------
it works well, i see more than 25 nets
one more time, Thanks
-----------------------------------------

Post by **Schtiel** » Tue Nov 13, 2007 8:32 am

c0den
I can't upload Monitor Pro right now, it is too big... Here is the License Utility from it:
http://www.sendspace.com/file/ksyj1p
Please look for it. Is it have a similar protection?

c0den · Post by **c0den** » Tue Nov 13, 2007 1:31 pm

Here´s the problem:

The File LicenceWizard.exe needs additional dll´s (and the security check resides into some of them) ... so it´s impossible for me to take a look the security, try to find a good link of Monitor Pro and I´ll see what I can do.

c0den

Post by **Schtiel** » Wed Nov 14, 2007 9:43 am

c0den,
here is the setup of the license utility. It contains all the necessary DLLs. Please try:
http://www.sendspace.com/file/60t6ph

most · Post by **most** » Wed Nov 14, 2007 9:46 pm

olá c0den

something is badly with the program proworx32
i can not edit in offline and i can not open samples !!!!

without authorization everything works but only 25 nets, with autorization i can edit only online with PLC !!?

can you solve this problem ?

or in alternative could you activate this program proworx_nxt that i upload (this program have a fix file but it doesn´t work)?
you are specialist in schnei_der, can you help me again and losing your time ?
http://plcforum.uz.ua//p. ... 1.rar.html

regards and thanks
most

c0den · Post by **c0den** » Fri Nov 16, 2007 4:59 pm

Sorry for delaying any answer... Too much busy right now.

I think that this weekend I can take a look on this problem.

c0den.

serg_mds · Post by **serg_mds** » Sun Nov 18, 2007 12:02 pm

hello c0den
Could you repeat upload the keygen for OFS 3.31L on rapidshare
In advance thanks.

vlad2006gr · Post by **vlad2006gr** » Mon Dec 10, 2007 5:34 pm

I have trial OFS v3.3. It is necessary setup.inx.
Please upload setup.inx OFS v3.3

Post by **Schtiel** » Tue Dec 11, 2007 11:16 am

I have OFS v3.2 only. Here is a setup.inx file for it:
http://plcforum.uz.ua//setup.inx.rar

care4u · Post by **care4u** » Tue Dec 11, 2007 2:41 pm

Please can someone upload again KeygenUnity_ProWORX_OFS_noRELEASE.rar. Preferably in Non-Rapidshare file sharing. Thanks alot in advance.

frankw · Post by **frankw** » Sat Jan 05, 2008 9:07 am

Hi,
the link is not working! I need the keygen for ProWorx32 v2.0 or the key code:

Code Entry Number:319622086
Computer ID:894272
Authorization Code:???????

Thanks

most · Post by **most** » Sat Jan 05, 2008 5:34 pm

(6170693)
6451287
the second nº is better
with out autorization you can edit in offline, with the autorization you can edit only online (?)

most

frankw · Post by **frankw** » Mon Jan 07, 2008 12:18 pm

The codes can not be used.
waiting the keygen.

dev · Post by **dev** » Mon Jul 14, 2008 2:44 pm

CODEN PLEASE HELP ME I NEED IT URGENTLY WITH KEY

SMart · Post by **SMart** » Tue Jul 15, 2008 9:37 pm

I have OFS 3.0. ? so i need some keygen for that. some day ago i've downloaded KeygenVijeo - if this tool can halp me? please tell me

AUXNo ffor OFS or othe keygen/ Thanks

satapia · Post by **satapia** » Mon Sep 15, 2008 11:22 pm

Porfavor gente , si es q alguien pudiera brindarme un link de descarga del OFS v3.3 o superior , por q tengo el 2.2 , y no logro conectar mi twido
gracias

zenchek · Post by **zenchek** » Tue Sep 16, 2008 1:55 am

satapia wrote:Porfavor gente , si es q alguien pudiera brindarme un link de descarga del OFS v3.3 o superior , por q tengo el 2.2 , y no logro conectar mi twido
gracias

satapia · Post by **satapia** » Fri Sep 19, 2008 4:03 am

thank you my friend , i installed the one from the official webapage , because i skip using emule , would i need i password , key license or something like that ?
if yes , could you make a rapidshare link for the emule link you posted , thank you very much men

zenchek · Post by **zenchek** » Fri Sep 19, 2008 1:41 pm

satapia wrote:thank you my friend , i installed the one from the official webapage , because i skip using emule , would i need i password , key license or something like that ?
if yes , could you make a rapidshare link for the emule link you posted , thank you very much men

See this topic, contains kepserver and medicine.
http://www.plc.net.ru/viewtopic.php?t=7 ... epserverex
regards - saludos- zenchek

Fortu · Post by **Fortu** » Thu Apr 23, 2009 9:33 am

Hi to all..
I'm havin' souch problems in the OFS installation.
I tried to use this serial:
serial: 21063301323
part number: TLXCDSUOFS33
..but it doesn't works 'cause I can't clic on the "next" button of the nstallShield Wizard!!

please..can someone tell me how to do???

Fortu · Post by **Fortu** » Thu Apr 23, 2009 1:53 pm

solved the problem

the correct serial is:
part number: TLXCDLUOFS33
serial: 21063301323

Thank you most!!

leofarhan · Post by **leofarhan** » Sun May 31, 2009 2:28 pm

Hello,

Is there any Schneider OPC Server with which I can communicate IEDs & Schneider PLCs to my SCADA. Some one suggest me AXS4MMS OPC Server, if anyone have this, please upload. Or tell me how can I do so.

sami · Post by **sami** » Thu Jul 01, 2010 7:31 am

Hello Guys,

This is my first time on plcforum. Can anyone help me in obtaining the authorization code for ProWorx32. The details are as following

Code Entry Number: 289128956
Computer ID: 785083

I will highly appreciate a quick reply.

Regards
Sami

Serge_n · Post by **Serge_n** » Thu Jul 01, 2010 12:21 pm

sami wrote:...
Code Entry Number: 289128956
Computer ID: 785083
...

viewtopic.php?t=8485

MAGO1412 · Post by **MAGO1412** » Wed Feb 08, 2012 8:19 am

Hello to all.
I have tried to generate this keygen for OFS 3.31 L, but they me do not work...

It would be possible that someone might generate the code since it me does not work on having treated with the keygen and does not allow me to install the OFS:

ID PC: 8997373
SerialNumber Unity Pro: 1234 5678 999
Code of Entry to the PC Unity Pro: 236193672
part number: TLXCDSUOFS33

Thanks.

vlad2006gr · Post by **vlad2006gr** » Wed Feb 08, 2012 8:18 pm

TLXCDSUOFS33-it's OPC Factory Server V3.3 Small 1 Station - where did you get this? Please upload to rapidshare. Then we can help. You wrote:

I have tried to generate this keygen for OFS 3.31 L, but they me do not work ...

OFS 3.31 L - is the OPC Factory Server V3.3 Large.
And do not post a question in different positions.

xorman2k7 · Post by **xorman2k7** » Tue Mar 05, 2013 5:16 pm

Hi,
I know this is an old post, but could it be posible for any of you to upload again that UnityKeygen? I can't seem to find it anywhere

thanks

PLCforum.uz.ua

[KEY]: Key for Schneider OFS (OPC factory Server V3.31 L)

[KEY]: Key for Schneider OFS (OPC factory Server V3.31 L)

Mirror and reupload of KeygenUnity

OFS copy to share

Hi

ofs v3.3

Re: ofs v3.3

very good

Re: very good

OPC Factory Server V3.31

IEC61850 Communication

Re: [KEY]: Key for Schneider OFS (OPC factory Server V3.31 L

Re: [KEY]: Key for Schneider OFS (OPC factory Server V3.31 L

Re: [KEY]: Key for Schneider OFS (OPC factory Server V3.31 L

Re: [KEY]: Key for Schneider OFS (OPC factory Server V3.31 L

Re: [KEY]: Key for Schneider OFS (OPC factory Server V3.31 L