[LINK]: WinAC MP for MP370

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Forum rules
x.bela
Posts: 4
Joined: Wed Oct 10, 2007 7:56 pm
Location: Europe

[LINK]: WinAC MP for MP370

Post by x.bela »

WinAC_MP V3.0 included SP2
http://support.automation.siemens.com/W ... d=15274643

WinAC_MP V3.1 included SP3
http://support.automation.siemens.com/W ... d=21400440

Service Tool ProSave V7.3.3
http://support.automation.siemens.com/W ... d=24379041

ProTool only support and must be installed.
For WinCC Flexible required WinAC_MP 2007
Top
beertje
Posts: 13
Joined: Wed May 02, 2007 3:20 pm
Location: Europe

Winac mp2007

Post by beertje »

Has anyone the release of WinAC mp 2007?
Top

Return to “SIMATIC system”