Hye All,
Did any body have Flow calc32 software with serial key or crack ?
Regards
AJC
[LINK]: Flow Calc32 and Festo Fluid
-
- Posts: 23
- Joined: Wed Oct 24, 2007 8:49 am
- Location: Saudi Arabia
-
- Posts: 1032
- Joined: Tue Nov 20, 2007 7:08 pm
- Location: Belarus
Crack Fcalc32
http://plcforum.uz.ua//Flowcalc.exe.html
Please replace crack in folder ce.
Please replace crack in folder ce.
Good Luck!in Russian wrote:Есть русская программа Расходометр_СТ. Может кому надо.
-
- Posts: 82
- Joined: Mon Aug 14, 2006 1:23 pm
- Location: Sud America
Crack Fcalc32
Thank you very much vlad for this post.
zenchek
zenchek
Last edited by zenchek on Thu Jan 10, 2008 11:42 am, edited 1 time in total.
-
- Posts: 1032
- Joined: Tue Nov 20, 2007 7:08 pm
- Location: Belarus
-
- Posts: 1
- Joined: Fri Jun 08, 2012 8:10 pm
Re: [LINK]: Flow Calc32 and Festo Fluid
link dead.
i used hex editor and cant find the hex numbers for the latest version of flowcalc32.
anybody has crack for the flowcalc32 v5.30?
or flowcalc v4.05 installaion software so that i can use hex editor and i can get offset 15FDC0 and replace:
old- 007562A11CB557008B008B10FF92EC00
new- 007462A11CB557008B008B10FF92EC00
thank you for all who will contribute in...
i used hex editor and cant find the hex numbers for the latest version of flowcalc32.
anybody has crack for the flowcalc32 v5.30?
or flowcalc v4.05 installaion software so that i can use hex editor and i can get offset 15FDC0 and replace:
old- 007562A11CB557008B008B10FF92EC00
new- 007462A11CB557008B008B10FF92EC00
thank you for all who will contribute in...
-
- Posts: 14
- Joined: Mon Jul 12, 2010 1:45 pm
Re: [LINK]: Flow Calc32 and Festo Fluid
I need Key for Flowcalc32 Version 5.33 key needed. please hlep us in this regards
Or some one please share the Licensed version 5.30 which Key is given Above.
Regards
Rafi
Or some one please share the Licensed version 5.30 which Key is given Above.
Regards
Rafi
-
- Posts: 14
- Joined: Mon Jul 12, 2010 1:45 pm
Re: [LINK]: Flow Calc32 and Festo Fluid
Hex Modification is not working please help
Thanks In advance
Thanks In advance