I want to diy a cable to connect the pc to plc S5 (step5),
who can give the diagram,
thanku!!!!!
[?] : cable to connect the pc to plc S5
-
- Posts: 18
- Joined: Sun Dec 16, 2007 9:50 am
- Location: China
-
- Posts: 508
- Joined: Mon Jul 16, 2007 12:28 pm
- Location: Europe
Re: [?] : cable to connect the pc to plc S5
liu2002 wrote:I want to diy a cable to connect the pc to plc S5 (step5),
who can give the diagram,
thanku!!!!!
Hi
Use search option in https://plcforum.uz.ua
regards
-
- Posts: 1
- Joined: Wed Jun 03, 2009 3:16 pm
- Location: Australia
I made my own using the following:
In the AutoCAD R12 file there is a complete drawing of a RS232 to
20mA Current Loop converter, suitable for data access or programming
functions.
It works on all Simatic S5 CPUs (tested on 100U CPU 100/102/103,
115U CPU941/942/943/944, 135U CPU928, not tested on 150U and 155U)
Since this is a PASSIVE converter (the current source is fetched
from the PLC port), it is not possible to program other devices
such as CP526/CP527 or OP393/OP396/OP5 etc., which require an ACTIVE
(with separate power source) converter.
Istructions:
- Open the file with AutoCAD R12 or higher.
- set the correct scale ratio in your computer to print the drawing
(spacing between the pins of the ICs must be 2.54mm)
- print the drawing onto a plastic transparent sheet (you may
print it on white paper and then photocopy it on plastic sheet)
- use the plastic sheet as master to obtain your printed circuit
by using photo-sensible boards.
S5_COM_TTY_hardware.zip
https://disk.yandex.ru/d/E7g4Fgp_heD7Uw
https://mega.nz/file/iXJVmBYZ#OBN-qw3q3 ... D5DI6JNcvI
In the AutoCAD R12 file there is a complete drawing of a RS232 to
20mA Current Loop converter, suitable for data access or programming
functions.
It works on all Simatic S5 CPUs (tested on 100U CPU 100/102/103,
115U CPU941/942/943/944, 135U CPU928, not tested on 150U and 155U)
Since this is a PASSIVE converter (the current source is fetched
from the PLC port), it is not possible to program other devices
such as CP526/CP527 or OP393/OP396/OP5 etc., which require an ACTIVE
(with separate power source) converter.
Istructions:
- Open the file with AutoCAD R12 or higher.
- set the correct scale ratio in your computer to print the drawing
(spacing between the pins of the ICs must be 2.54mm)
- print the drawing onto a plastic transparent sheet (you may
print it on white paper and then photocopy it on plastic sheet)
- use the plastic sheet as master to obtain your printed circuit
by using photo-sensible boards.
S5_COM_TTY_hardware.zip
https://disk.yandex.ru/d/E7g4Fgp_heD7Uw
https://mega.nz/file/iXJVmBYZ#OBN-qw3q3 ... D5DI6JNcvI
Code: Select all
https://disk.yandex.ru/d/E7g4Fgp_heD7Uw
https://mega.nz/file/iXJVmBYZ#OBN-qw3q36XusGJ0RDvqKXxdCmWMaWcNxD5DI6JNcvI
-
- Posts: 4
- Joined: Tue Jun 09, 2009 1:08 pm
- Location: India
S5 cable Details [150U - CPU924]
Hi mick_5l,
Can you please send the link again I am not able to download the file. or is there is any way to upload the 150 U CPU924 program.
Thanks,
Can you please send the link again I am not able to download the file. or is there is any way to upload the 150 U CPU924 program.
Thanks,
-
- Posts: 3
- Joined: Sat Dec 02, 2023 9:30 am
Re: [?] : cable to connect the pc to plc S5
Good evening
can any re-upload the schematic of cable programming S5 plc.
can any re-upload the schematic of cable programming S5 plc.
-
- Posts: 122
- Joined: Fri Aug 11, 2006 6:16 pm
- Location: Russia, Komi
Re: [?] : cable to connect the pc to plc S5
The schematic of S5 adapter I made myself more than 20-ty years ago. Now You probably can't find out cellular phone data cable, so use USB-RS232 TTL cable.
The schematic is quite simple to understand how does it works.
http://gofile.me/400mr/MofAcjIgE
The schematic is quite simple to understand how does it works.
http://gofile.me/400mr/MofAcjIgE