[LINK]: Engineering Tool DOCPRO V5.4 SP1/2, v9.0

[Juli]

Engineering Tool DOCPRO V5.4 with Trial key
http://support.automation.siemens.com/W ... n/27249263
b]Prerequisites for the installation of DOCPRO V5.4:[/b]
STEP 7 V5.4 and higher
STEP 7 Professional Edition 2006 and higher

The use of S7DOCPRO v9.0 is released for use under the following operating systems:
MS Windows XP Professional SP2 or SP3
MS Windows Server 2003 R2 SP2 standard edition as workstation
MS Windows 7 32-bit Ultimate, Professional and Enterprise (standard installation), with or without SP1. The Windows XP mode under Windows 7 is not released, however
New as of this service pack: MS Windows 7 64-bit Ultimate, Professional and Enterprise, with or without SP1
New as of this service pack: MS Windows Server 2008 R2 (64-bit), with or without SP1
The compatibility of STEP 7 with all other operating systems is not guaranteed. Use them at your own risk.
S7-DOCPRO is either installed as an optional package for the automation software STEP 7, which also must be installed, or in connection with the complete PCS7 package.

https://yadi.sk/d/0IYX6gYu3PHr7V
https://mega.nz/#F!tORVwZIL!QGGcz8VD5jN4w0knH3KYFg

key:
SIFLA1DOCP0504.EKB

DOCPRO V5.4 SP1
http://support.automation.siemens.com/W ... 54_SP1.zip

[esantoshex]

Hello!

Please!! Can anyone reup the DocPro 5.4 link?

Tks a lot!
esantos

[sebneo]

hello,

please reupload ...

[Update]

https://yadi.sk/d/0IYX6gYu3PHr7V
https://mega.nz/#F!tORVwZIL!QGGcz8VD5jN4w0knH3KYFg

[sebneo]

thanks for upload

[dosilyoun]

How can i activate the license key? And where is the license key? I didnt find it in the folder.

Greetings

[CoMod]

in the folder DOCPRO