[?]: connection CPU 226 and Protool Runtime

[joopiter]

Hi friends
I want to connect a cpu 226 simens to Protool also i have RS232/PPI cable ,
but i dont know that is it necessary to instal a cp5611 on my pc to connect them
or, i can connect them without cp5611?
can anyone help me?

[Umencho]

Hi friends
I want to connect a cpu 226 simens to Protool also i have RS232/PPI cable ,
but i dont know that is it necessary to instal a cp5611 on my pc to connect them
or, i can connect them without cp5611?
can anyone help me?

Hi

I don't understand very well your purpose. For programing this type CPU you need Microwin, and for connection you can use RS232/PPI cable. This mean PC - PLC. Protool is using for programing some type HMI panels. And this panel is connecting to the PLC (CPU) with MPI, Profibus or ... this depends from your panel and CPU posibilities. And now If you have Protool's program for some type panel and you want to download this program to the panel must chose MPI/profibus, Serial, TCP/IP or usb
connection, from Protool.

regards

[CoMod]

FAQ
ProTool/ProRT and S7-200 with PC/PPI-Cable
http://support.automation.siemens.com/W ... n/16650850

[joopiter]

Sorry my question was not clear
i made a pc project in protool and i run it with protool run time on my pc,then i want to connect cpu 226 to same pc,to work them to gether,i only have a rs232/ppi cable and i have not cp5611 on pc,is the cable enough for communication?

[CoMod]

You have this cable and set switchs Freeport and speed 9600 ?

http://support.automation.siemens.com/W ... n/16532946

[joopiter]

what is different between freeport mode & and multimaster mode?