[LINK]: CEMAT 7.0 SP1 / 8.0 SP1 / 9.0 for cement industry

[Link]

http://support.automation.siemens.com/W ... n/27022256

Update to CEMAT V7.0
CEMAT, the control system for the cement industry,
is now available with version 7.0.
CEMAT V7.0 is based on the SIMATIC PCS 7 V7.0 + SP1 process control system
and Windows XP/Server 2003 operating systems.
Existing CEMAT systems with version 6.0 can be upgraded to CEMAT V7.0.
This update is free of charge, if you have already purchased a licensed CEMAT V6.1 product.
The required software is available for downloading.
You can obtain more information on CEMAT via the following Internet address:
http://www.siemens.com/cemat

CEMAT 7.0 SP1 and CEMAT 8.0 SP1
https://mega.co.nz/#F!uIVl2ASR!ZVpwlbsjuFW4Flhn2cFzJQ

How unpack archive and CD-image (ISO, NRG) files

[CoMod]

Thanks

try keys CEMAT v6.1 + SIFLA1THPO0700
For the CEMAT keys from version 6.1 are valid
Server, Client and Single tested and work with keys for v6.1

Лицензии от CEMAT v6.1 без проблем подходят для 7.0
Проверил все - сервак, клиентов и сингл.

[vndl]

Please project code for CEMAT v7. Thanks All...

See readme_V70.pdf

Open the folder "Installation CEMAT Software" in the main directory with the Explorer and start
the application "Setup.exe". This command installs CEMAT V7.0, including all entries in Microsoft
Windows files. Important operating instructions will be given to you during setup.
Select the correct project key for your project:
000 = CEMAT
004 = Holcim
006 = Dyckerhoff
007 = Heidelberger Zement
023 = Vigier
024 = Bushehr
025 = Caima
026 = Alsen
028 = Rossi

[XMAS]

dear friends

CEMAT V7.0 + SP1

See 1st post ^^^^

regards

XMAS

[CoMod]

plz uplaod CEMAT keys version 6.1 for v7 sp1 ,
thnx

see viewtopic.php?t=218

[Leopard]

Hi Gentlemen

I need to know how can plug Cemat7 in to PCS7.1.
Cause up to now I have had some failed attempt to do that.
Please kindly do me a favor and help me with this issue.
Thanks in advance

Kind Regards
Leopard

[rodney_eee]

All the links are down. Please upload and relink files.

[Update]

CEMAT 7.0 SP1 and CEMAT 8.0 SP1 mega updated

[BlackFlag]

Hi guys,

Any share of this CEMAT v8.1 ?

https://support.industry.siemens.com/cs ... 0&lc=en-WW

Thanks and btw great job to all contributors

[tanoomand27]

hi
i downloading the CEMATV8.0 and run with PCS7 V8.0
the picture C_@PCS7Typicals_CemV8_000.PDL is with UnKonwn Object for all block icon
pleas help me for this problem

[tanoomand27]

i downloading the Cemat V8.0 from this site
run cemat and config with project based PCS7 V8.0
when i open the C_@PCS7Typicals_CemV8_000.PDL All block icon viewed UnKonown Object and cant see block icon
pleas help me

[BlackFlag]

Hi guys !

Thanks for your great jobs in providing those software.

I need Cemat v7.1 + SP2, is there any source even in trial mode ?

Thanks

[wapush789]

do you guys haev cemat v8.1 or v8.2? would you mind uploading it? thanks in advance.

[CoMod]

9.0 but without keys

[genkal]

Please share! Just for the manuals and to see the new features. Thank you!

[Info]

Just for the manuals and to see the new features.

https://support.industry.siemens.com/cs ... cemat-v9-0

[wapush789]

please share your cemat v9.0

[Link]

CEMAT v9.0
https://mega.nz/#F!BfYkiBJK!ZLVJc3_JVJjys66JPhd3lw
https://disk.yandex.ru/d/qA3JuMSnuSSXNA ... AT_V90_ISO

The installation is always carried out on D:\CEMAT_CS
The selection of another destination folder is not possible.
During the setup the following installation steps are carried out.
see readme.pdf

Russian
Установка только на диск D в папку D:\CEMAT_CS
Читай readme.pdf

[wapush789]

thanks for sharing. now i would wait for EKB for cemat v9.0

[Update]

SIMATIC PCS 7 CEMAT/MinAS V9.0 Upd1 for PCS7 v9.0 SP1 only
https://support.industry.siemens.com/cs ... -v9-0-upd1
or
https://mega.nz/#F!BfYkiBJK!ZLVJc3_JVJjys66JPhd3lw

cemat v9.0
https://disk.yandex.ru/d/qA3JuMSnuSSXNA
https://disk.yandex.ru/d/qA3JuMSnuSSXNA ... AT_V90_ISO

[mmohamadian]

Dear Update
Can You please help me find CEMAT V8.2 .

[NeoZeruel]

I'm looking for CEMAT V8.2 too.

Please, if someone has it, share it with us.

[MuratKarilci]

HI DEAR MEMBERS,
I have the latest version of EKB(Sim_EKB_Install_2021_08_20), but at most it can be used to generate licenses for CEMAT 8.0. Does anyone have a SMAT 9.0 license generator?

[kaitoukid_1997]

Pls update link