[?]: Proface Cable Gp577R-TC11 info required ?

[gremlin]

Hi all

does any one know what cable to use to program a Pro-Face
Gp577R-TC11 colour touch HMI
is it programed via the tool port round 8 pin or via RS232 9 pin ?

many thanks

gremlin

[gremlin]

i believe the cable i need is a GPW-CB02
this is used by proface GE and XYcom but i canot find a pin diagram anywhere
does any one know what connections are in the lead ?
many thanks

gremlin

[bobturbos]

i believe the cable i need is a GPW-CB02
this is used by proface GE and XYcom but i canot find a pin diagram anywhere
does any one know what connections are in the lead ?
many thanks

gremlin

The GPW-CB02 It is not a simple cable because it has an internal TTL to RS232 converter. Anyway it is the same of Telemanique programming cable!!!
You can download a block diagram from.

http://forums.mrplc.com/index.php?act=a ... st&id=3326

[Front_Line]

Code: Select all

The  GPW-CB02 It is not a simple cable because it has an internal TTL to RS232 converter. 
Anyway it is the [b]same of Telemanique programming cable[/b]!!!
You can download a block diagram from.

Can anyone give a working scheme for the cable.
From HMI_Cab_49.pdf http://plcforum.uz.ua//HMI_Cab_49.pdf unclear where to put the jumper +5 V.
And the photos are not all clear.
The block diagram is not clear compound 8-pin on the connector.
More similar to the adapter to the Simatic S5, only without optocouplers.
In Russia, the price of cable is 380 euros in the company of Pro-face, and the price MAX232 2-5 $.
In this case, Siemens MPI adapter is 310 euros.

[guchifosco]

Hi everybody! Which will be the equivalent Telemecanique cable for the GPW-CB02? Thanks in advance