hello, can somebody help me.
I have a B&R MINICONTROL MCGE31-0.
which software do you need to progam it and where can i find some information?
[?]: which software for B&R MINICONTROL MCGE31-0 ?
-
megagastje
- Posts: 7
- Joined: Sat May 17, 2008 1:32 pm
- Location: Europe
-
eumel_30
- Posts: 7
- Joined: Wed Feb 06, 2008 8:16 am
- Location: Europe
Hello,
the old B&R PLC-Types like Minicontrol or Midicontrol (black-line) - is no longer supported through B&R.
Therefore you will not found any information on the B&R Website.
The Software for programming these PLC-Types is called "Prosys".
It´s an old DOS-Programm.
You also need a special interface-adapter to go online with the plc.
It´s a converter between the parallel-port of the PC and the Online-Interface of the plc.
You should contact your next B&R-office for further information or help.
the old B&R PLC-Types like Minicontrol or Midicontrol (black-line) - is no longer supported through B&R.
Therefore you will not found any information on the B&R Website.
The Software for programming these PLC-Types is called "Prosys".
It´s an old DOS-Programm.
You also need a special interface-adapter to go online with the plc.
It´s a converter between the parallel-port of the PC and the Online-Interface of the plc.
You should contact your next B&R-office for further information or help.