[LINK]: WinBass for Baumuller drives

[Prods]

hi all, I need Winbass software for parameterization of Baumuller drives .

Thanks.

[ppp]

This is very old program.
Now everyone use winbassII for new converters.
Once for a long time has made under already established program installer in Russian language.
But program in English and Deutsch language.
Probably there not all converters.

But have only this WinBass version 6.08.



http://plcforum.uz.ua//winbass.exe

[Prods]

Thank you ppp .
And what about WinbassII do you have it?

[alexvega]

I need Pinout of Baumuller drives programming cable.
(drives X23 - PC com).
Please Help me ,

Thanks .

[nnaf]

http://www.baumuller.ch/downloads_software.htm
http://www.baumuller.ch/DownloadInternet/

[Toxicguy]

Does anybody have valid serial number for WINBASS software? I downloaded version 6.08 but it unfortunately installs without any keys. Problem is that this version doesn't support BUS6VC version 5214.12. Well, I have version 6.13, but it ask serial number.

Thank You in advance.

[ppp]

distributive WinBASS v6.11 incl serial code

mirrors:
http://depositfiles.com/files/pikr0hbq6
http://webfile.ru/6059915
http://upfile.su/1558
http://www.ziddu.com/download/20029088/ ... 1.rar.html
http://bayfiles.com/file/iLXZ/KLODHU/WinBASS_V6.11.rar
http://sendfile.su/641321
http://multi-up.com/740435

[mohdabshr]

Hi ppp
I need pcbass if you have because we have inverter with sw 200.0 and with winbass I didn't found this sw it only 202.2

[mohdabshr]

dear


we have problem in one drive baumueller CONTROLLER Baumüller M-Drive-Reglergerät BUS 6M and power card is BUM63S-150/195-45-M-005
, when we start drive it give error 40 in forward direction and error 700 in reverse direction and i try to find this error meaning but i failed to find right documents about errors code and also i am trying to go online with WinBASS II v6.08 and v6.11 file BUS6VC and there is SW 0202.02 the software complain about the SW version the controller SW is 0200.00 and this SW not included in WinBASS II v6.08 BUS6VC and v6.11, SO I need to know the meaning of the two errors(40&700) and from where i can get the file of SW 0200.0 or which WinBASS vesion have the file SW 0200.0 in BUS6VC.

thanks,

[arslan]

Hello Everone,

We have Baumuller BUM61-40/60 servo drive, originally it was commissioned in speed control mode but now we want to
change it to position control mode. if some one has manual that how can we change it position control mode and control the direction of motor by means of digital inputs, please share with me the manual.
Win are using WINBASS software.

Thanks

Arslan

[m0eX]

Can anyone reupload links? Thanks

[Rishinath R]

distributive WinBASS v6.11 incl serial code

mirrors:
http://depositfiles.com/files/pikr0hbq6
http://webfile.ru/6059915
http://upfile.su/1558
http://www.ziddu.com/download/20029088/ ... is_Dead :(
http://bayfiles.com/file/iLXZ/KLODHU/WinBASS_V6.11.rar
http://sendfile.su/641321
http://multi-up.com/740435

Hi,i download the software but serial key is not working.plz help

[MKoushyari]

Hi
Is it possible to send the download link again?

Thanks

[Skippy]

Hello !
Can anyone can reupload winbass II ? Thx