http://www.eplan-eb.ys168.com/ (open only with MS IE - not Firefox)
or
http://plcforum.uz.ua//E ... ulator.rar
1.9 mb
INSTALLATION INSTRUCTIONS
1. Unzip, Unrar and run EPLAN Electric P8 1.9_DONGLES_Emulator.exe
2. Now you need to open "Dricer" tab, Press "INSTALL" button and if
installation was successful Driver
status window will be changed to "Status : driver is installed"
3. Now you need to open "Emulator" tab, Then you press "Start Service"
button. If everything is ok you'll see "HASP/HARDLOCK Emulator Service
is running"
4. Open "DONGLES" tab and press the "Load dump" button.
Load hl5189.dng
5. 复制 SN-U10066. 到 C:\Documents and Settings\All Users\Application Data\EPLAN\Common