[?]: is possible upload program from VT100 ?

[Husanto]

Hi all,

I want to ask, possibble to upload program from VT100??
use vtwin maybe??

Thanx

Husanto

[MareBlu]

Hi,Husanto.

Maybe I'm going to tell you a "mistake"... But...
If I have a right remembrance... I used last ESA VT100 panel about 15 years ago...

To program it you need an old DOS software namet VT-Prog (or VT-eds) and a Eprom programmer.
In fact (may be...) you have to "extract" the chip (EEprom) from mainboard of VT100 and place it on the Eprom programmer. After this download yor application; then put the chip on the soket of the VT100 mainboard.

[flopez]

http://plcforum.uz.ua//VTProg_ESA.zip
or
http://dfiles.ru/files/stmwwsjs9
or
http://www.multiupload.nl/49B3BKDASZ

flopez

[Husanto]

Thanx you for the help......

[alinekoo]

pleaseeeeeeeeeeeee help me, the link was deleted.
pleaseeeeeeeee

http://plcforum.uz.ua//VTProg_ESA.zip

flopez

[Daniel_Brasil]

Hello Alinekoo,

The link was not deleted.
19/01/2014


To download the file, follow this steps:

1 - Enter in file link: http://plcforum.uz.ua//VTProg_ESA.zip
2 - In Rapidshare page, press the "to Download" button;
3 - In the new page, you will see: "VTProg_ESA.zip 6.40 MB zip ". Put the mouse into this line,
and it will turn blue.
4 - Now, move the mouse to right side and you will see a small down arrow. Press this arrow and the download starts.


I hope this "cake recipe" helps you download the file.

best regards,
Daniel

[alinekoo]

Dear Daneil
thanks for you useful help. i can download the file.

Ali Nekounam

[mudabbir]

i want the programming software for vt520t ESA make VTProg

Please help me