[?]: I/O server Intouch <-> 2 plc connections via CP34

[PLC_ITA]

Hello friends, i need to connect 2 siemens S7 300 whit ethernet CP343-1
to existant supervision made whit Intouch 7.1
Already exist 1 plc and the supervision, i need to connect a second plc.

I don'k know I/O server and i have 2 question :

1) is possible ?
2) if is possible, how i need to configure ?

Thank's in advance.

PLC_ITA

[Roman]

Yes I's possible
See http://plcforum.uz.ua//S ... r.rar.html

[Umencho]

Hello friends, i need to connect 2 siemens S7 300 whit ethernet CP343-1
to existant supervision made whit Intouch 7.1
Already exist 1 plc and the supervision, i need to connect a second plc.

I don'k know I/O server and i have 2 question :

1) is possible ?
2) if is possible, how i need to configure ?

Thank's in advance.

PLC_ITA

Hi

See here http://plc.net.ru/viewtopic.php?t=6660& ... assidirect more details about connection...
Or you can tell us how is made connection with first PLC ( I mean what kind of server is using...) and just to add other PLC...

OR IF YOU WANT TO READ ALONE
here http://61.37.246.137/TECH/technotes/estechnotes.htm very usefull INTOUCH link.

regards

[Roman]

[bunglehead]

Hello friends, i need to connect 2 siemens S7 300 whit ethernet CP343-1
to existant supervision made whit Intouch 7.1
Already exist 1 plc and the supervision, i need to connect a second plc.

I don'k know I/O server and i have 2 question :

1) is possible ?

It's possible for both DAServer and IOServer concepts of course. If you have an existing system based on version 7.1/7.11 most probably you use IOServer. I don't recommend you to switch to DAServer cause this toolkit still has some problems.

2) if is possible, how i need to configure ?

Thank's in advance.

PLC_ITA

For IOServer you have to configure another connection on existing Simatic.NET server.
For DAServer SIDirect you can use more than one PLC objects in configuration. DASS7 I think requires Simatic.NET too.