[?]: Can I conect INTOUCH 9.5 with MPI comunication to S7?

nik_denev · Post by **nik_denev** » Fri Sep 05, 2008 10:02 am

Hi
Please help I am new in INTOUCH
I have S7-300 PLC without Ethernet CP can I conect it to INTOUCH 9.5 with MPI comunication?
Can somebody explain me step by step how to do it?
10X in advance for help.
Best regards

Post by **Schtiel** » Fri Sep 05, 2008 10:21 am

nik_denev wrote:can I conect it to INTOUCH 9.5 with MPI comunication?

Yes, you can. See Device Connectivity Matrix.
Just use an appropriate wonderware device integration server.

nik_denev · Post by **nik_denev** » Fri Sep 05, 2008 10:42 am

Yes but how I must config all software part to can comunicate with PLC.
I have ArchestrA and try to use it but no have result.
Use CP 5511.
I not do something how must.

Umencho · Post by **Umencho** » Fri Sep 05, 2008 11:19 am

Hi

Just follow instructions here http://61.37.246.137/TECH/html/t001110.htm

regards

nik_denev · Post by **nik_denev** » Fri Sep 05, 2008 12:20 pm

10X for help I will try it.
Hope that anything will be OK.

Umencho · Post by **Umencho** » Fri Sep 05, 2008 2:10 pm

Hi

I hope so.

Regards and nazdrave

bunglehead · Post by **bunglehead** » Sat Sep 06, 2008 4:20 pm

nik_denev wrote:Yes but how I must config all software part to can comunicate with PLC.
I have ArchestrA and try to use it but no have result.
Use CP 5511.
I not do something how must.

Just setup an general OPC Server (from Simatic.NET) to an MPI interface and use OPC Client object as a DI object. Should not be any problems with it. If it's a remote node (having CP5511) use remote suitelink server on it. I recommend 'old' OPCLink 8.0 instead of A2 FSGateway cause it's buggy.

PLCforum.uz.ua

[?]: Can I conect INTOUCH 9.5 with MPI comunication to S7?

[?]: Can I conect INTOUCH 9.5 with MPI comunication to S7?

[?+]: Can I conect INTOUCH 9.5 with MPI comunication to S7?