REQUEST: Lauer PCSPROplus full

dofie · Post by **dofie** » Tue Sep 09, 2008 8:53 pm

In PCS9100 need to find out level password.
Cable PCS733 is made by myself. Have problem to connect with PCSPROplus demo (i think WinXP is the problem) and don´t know right positsion of DIL switch.... Only info what i have:

2. Connect the communication interface of the PCS 8010 with the cable PCS 733 and check the rotary switch position at the PCS (switch position 2). Switch the PCS off and on again to read in the switch position again after modification.

Any help?
Later i try install Win98. But maybe anyone have PCSPROplus full?

thanлs
спасибо

dekor · Post by **dekor** » Fri Sep 12, 2008 4:57 pm

Dear friend,
from my experience, on XP system it looks like it work.
But I can go on line.
I use W98, and work.
Try and tell us your results.
dekor.

dofie · Post by **dofie** » Sat Sep 13, 2008 1:31 pm

i find old notebook with win95 and trying with it. Now i successfully download soft from panel (after 3 try) and find out what i needed, BUT
now i add some language and trying upload back in panel changed soft ....
all looks ok and PROplus_DEMO say me - ok - its uploaded, but after panel reboot nothing change

. If i try upload again PROplus say me - only 1 file is different - strange... may be need switch some DIL switces ? i don't have info

May be somebody help me with full version PROplus?

dofie · Post by **dofie** » Mon Sep 15, 2008 5:26 pm

I get full version PCSPROplus from LAUER HMI support. PROplus v2.2 with WinNT support. It work with XP! but need strong NO activites on background ( don't touch the mouse

. For now i have solved all my problem. Even no problem with russian menus...

Thanks for listen.

p1gar · Post by **p1gar** » Tue Oct 28, 2008 8:56 am

Dofie! I have the same problem with connecting to LAUER PCS 950 Plus.
I use the program PCSPROwin V7.3 Demo.
I was downloaded it from this link
http://plcforum.uz.ua//PC ... rPanel.zip
.
When i try to connect to panel (upload or transfer), leds "SYS" and "COM" are blinking and than appear error "Please check connection to com_ check".
The programming cable i made by myself.
Do you can give me the link with full version with WinNt support?
I need to make backup from Lauer panel.
Thank you.
I am sorry for my english.

monty_burns_007 · Post by **monty_burns_007** » Thu Oct 30, 2008 7:01 pm

So this rapidshare link is just a demo version ? Can PCSPPRO be used to download from under a XP PC ? If so I 'm interested in this version since my current experience is that you can only download from under W95 or older.

Monty

p1gar · Post by **p1gar** » Fri Oct 31, 2008 5:34 am

Yes, it is demo version.
I'll try to use this program under Win95 if it is possible with my PC.

But Dofie sad that full version PCSPROplus v2.2 with WinNT support exist.

Alex1960 · Post by **Alex1960** » Fri Dec 19, 2008 11:57 am

dofie wrote:I get full version PCSPROplus from LAUER HMI support. PROplus v2.2 with WinNT support. It work with XP! but need strong NO activites on background ( don't touch the mouse . For now i have solved all my problem. Even no problem with russian menus...

Thanks for listen.

Dear Mr. dofie!
I kindly ask you to upload
this program to rapidshare
or connect with me.
I have the same ppoblem
with PCS9000 - program lost
Thanks

dofie · Post by **dofie** » Sun Dec 28, 2008 7:07 pm

PROplus v2.2 with WinNT support - i get it FOR FREE at LAUER_HMI_support. If you want it just write to him.

Only differents between demo and full version is : after uploading you get the screen "DEMO VERSION" for 3 sec after every 10 min...
All other work without differences (i don't find any...).

p1gar - PCSPROplus don't work with PCS 950 Plus. Work only with PSC9000 and PSC9100.

Under XP (2Ghz) i try upload about 10 times - not sucess - best result is upload 98%

It work with XP! but need strong NO activites on background ( even don't touch the mouse !)

then run on Win95(pentium 1 ) - uploading works with 1st try.

Alex1960 - i send soft to you

sorry for my bad english

monty_burns_007 · Post by **monty_burns_007** » Wed Jan 07, 2009 7:13 am

thanks dofie,

Will try it out.
What i do see your version only supports 2 newer panels.
In my older version or non NT version i can support almost all lauer panels.

On installation it searched my harddrive for existing versions.
Maybe i had to install my older full version and then yours to upgrade to NT serial download support for all panels.

monty

p1gar · Post by **p1gar** » Sun Jan 11, 2009 5:42 am

Thanks for your reply, Dofie!!

chetanp2000 · Post by **chetanp2000** » Mon Feb 01, 2010 2:34 pm

Can anyone upload PCS Proplus V2.2?

sajkat · Post by **sajkat** » Sat Jan 15, 2011 11:31 am

I have a similar problem to you. (lack of password)
I don't know what is the password on the PCS 9000 panel.
I have the original HMI project in which I found 3 passwords. Two of them are 4 digits length one is 3 digits length.
None of the 4 digits passwords works and I don't really know if it is possible to input 3 digit password. (maybe someone could help me - if there is some special key combination to accept shorter passwords than 4 digits). The passwords must have been changed by the machine operators.

From posts I understand that if I upload project from PCS to PC I will be able to check what are the passwords. Does it also work if the passwords were changed ?

If it's not a problem someone please upload the PCSProPlus.

kkzh · Post by **kkzh** » Wed Sep 12, 2012 1:23 pm

Can someone offer me such software even at cost?
Regards,
kkzh

PLCforum.uz.ua

REQUEST: Lauer PCSPROplus full

REQUEST: Lauer PCSPROplus full

My experience

win95 works ok

i get it.

Re: i get it.

Re: REQUEST: Lauer PCSPROplus full

Re: REQUEST: Lauer PCSPROplus full

Re: REQUEST: Lauer PCSPROplus full