Hi,
There is a problem, I don't know how or is it possible to solve:
How to save wincc flexible project from PG to memory card CF/USB (like during operation Backup/Restore) without HMI device.?
It's easy if you have HMI device.
But... if not?
It's necessary if you need to make project update and HMI device is no available (you are in office and device is on site, far away)
[?]: How save project to CF without HMI device ?
-
landey
- Posts: 7
- Joined: Thu Aug 23, 2007 6:42 am
- Location: Europe
-
dm1dm2
- Posts: 16
- Joined: Thu Mar 01, 2007 10:49 am
- Location: Australia
I have done it before by first copying compiling and running the project on my PC.
Then plug CF card with existing project into laptop and browse it with windows explorer to see whaich project files are on the card - it was a long time ago,
so I can't remember which directory was required.
Then copy the compiled runtime files off your PC to the same folder on the CF card.
Then plug CF card with existing project into laptop and browse it with windows explorer to see whaich project files are on the card - it was a long time ago,
so I can't remember which directory was required.
Then copy the compiled runtime files off your PC to the same folder on the CF card.