[?]: How transfer licence to TP177B PN/DP ?

krcedinac · Post by **krcedinac** » Wed Nov 19, 2008 1:00 pm

Hello to all

How to transfer licence key to the Tp177 PN/DP panel.
I never had to do it until now.
When I try to use ALM it says that it needs to be installed on the target PC (panel) and also I can not see it (panel) on my LAN althought that Smart Acces is working.

Thanks in advance

Post by **CoMod** » Wed Nov 19, 2008 1:30 pm

http://support.automation.siemens.com/W ... n/22195512
http://support.automation.siemens.com/W ... n/23238814

krcedinac · Post by **krcedinac** » Wed Nov 19, 2008 2:09 pm

Hello CoMod,

Thanks for answering. I use WinCCFlex 2007 Advanced and ALM 3.0.I tried to transfer the key both with Ethernet and MPI/DP and I get same message.

I know for sure that both Ethernet and Profibus are working and both adreses are good. I do not know what is wrong.

I decided to try one last time and it worked like a charm although I did not change anything.

Regards

Post by **CoMod** » Wed Nov 19, 2008 2:41 pm

I also viewed this message... because I have installed new Flex2008 and ALM4
1. Need update Panel OS to your actual Flex version
2. Set adress MPI/Profibus and Enable Remote control in Panel.

I have transfered my key after 1,2.